Stiff Enough Detents?

[LEDowner]

Hey guys just got a new halo b with RD for christmas. I have heard some stuff about the halo b double or even tripple feeding i was just wondering how i could check too make sure my detents are stiff enough. Playing paintball tommorow and hopping my led doesnt chop. Thanks

[imaginer123]

well go shoot it and see if it chops and if it does then you will need either double detents or these ones here at www.kilaproducts.com very very nice and in that cse you would only need one with one of those

[Crazy4Paintball1]

Well basicly the fastest way to tell if your detents aren't stiff enough is you will double feed.

Take your detent out and press on it....if it is really soft (like it pushes in really easy) then it is probably not stiff enough. If it isn't really soft (there should be some resistence...not a lot but some) then you should be ok.

If your detent is too soft all you need to do is get a stiffer one. You can get a stock one or you can look into other brands. I personally use the Cobra Indestructdetents. They are awsome.

[jesus]

sick detents

[three fut nuthin]

great detents, thanks for the link,ordering some as we speak. They should do for you. if its the stock detents in the LED, then it will more then likly double feed, i had an LED moons ago and i rtried the halo and it was sad...

[Crazy4Paintball1]

My stock ones worked perfectly, as did the WDP Bullet Ball detent (I also had one that was really soft), the best though are the Cobra Indestructdetent.