Help Please

[GAVINS]

I HAVE A 2K0 LCD WITH A STAINLESS STEEL HAMMER.
WHEN I GOT THE GUN IT HAD A MICRO LINE GOING FROM MY REG ON MY TANK(NITRO DUCK) TO THE MINI REG THE PRESSURE ON THE TANKS REG WAS AT 800psi AND I WAS SHOOTING AT 280FPS.
I HAVE NOW PUT A ON OFF SWITCH ON WITH A MACRO LINE AND WHEN THE PRESSURE FROM THE TANK WAS AT 800PSI I WAS SHOOTING 310FPS SO I TURNED THE TANK DOWN TO 595psi AND IT IS SHOOTING AT 280 TO 290 IS THE PRESSURE CORRECT. WOULD CHANGING FROM A THINNER HOSE TO A LARGER HOSE DO THAT OR WAS IT SOMTHING ELSE.

[Emmit]

first off...turn off the CAPS lock!!!!!

Second off, yes you went to a larger ID hose which means you now have more airflow. This is a good thing. Remember the old statement high press/low volume and low press/high volume....well you were doing the same thing. You had a low volume going into the gun (Micro line) so you needed a higher pressure, now you've got a higher volume going into the gun (macro line) and you need a lower pressure.

[WarpedKid02]

Your pressure is fine, if you want you could bump it up to 600psi.

[Syentific]

This is a good thing...stop crying...:cry:

Just kidding