Chrono Results

[fourstevenleong]

What are you guys getting over the Chrono with your speeds? Does the reg need to break in?

thanks

[ASU_BALLER]

once i got an lp tank i get like +3-3 or so but with my hp tank it was kinda bad like plus or minus 10 or so

[tgaffner]

I'm getting +/- 5 with my crossfire.

[davew]

I'm getting +/- 5 with my crossfire.
+ - 15 20 with my crossfire lp
but i was told they take time to break in (regs)
i only have 2 cases through mine so far
so .. hopefully it will get better soon

[Snowfire]

that is horrible

[winter001]

I'm getting + - 3-5 abouts, it should get better after the gun breaks in

[ZoomZoom]

+ - 3 or 4 from the time i pulled it out of the box

[Little Dave]

+2/-2 off my Wdp Angel Preset tank

[Talfuchre]

The vast majority of the Chrono diferences are paint related. To really check this - get our some calipers and get 10 really consistent paintballs and then measure the result.

TF

[TrashDoG]

+ - 15 20 with my crossfire lp
but i was told they take time to break in (regs)
i only have 2 cases through mine so far
so .. hopefully it will get better soon

im having the same prob with my preset Angel AIR.... everything is brand new, about 2 cases shot through. 10-20fps fluctuations... I just assumed the tank needs to be broken in...

Any suggestions? Doesnt seem to be getting much better

[esandov]

I have put 6 cases of paint throught mine and am getting some wicked fluctuations. +/- 15. This seems very unusual. I have a good paint to barrel match and a MacDev Conquest, have fed it paint and yet this is teriibly inconsistant. I had a MacDev conquest and Gladiator on my Ir3 and was getting +/-2. Anyone know what going on?

Settings:
LPR 60
Dwell 9
Tank Output: 400 psi
Inline Reg: 250 fps
Volumizer: Med

Can someone point me in the right direction?

[nolimit2481@aol.com]

im gettin +/- 1or2 and only 3 cases throo it
we also used 4 pods to test it and every shot except 2 was good one was -5 and 1 was - 14 lol

[Talfuchre]

+ / - 2 from the time I pulled it out of the box - when I have good consistent paint.

TF

[Sauron]

+-3 with bad paint and JT Barrel

[welted]

Settings:
LPR 60
Dwell 9
Tank Output: 400 psi
Inline Reg: 250 fps
Volumizer: Med

Can someone point me in the right direction?

try bumping your Conquest output to like 450-500psi. the rule of thumb is at least 200psi between regs for proper regulation. this may help.

[pelham]

I too have a conquest 45/45 and am having +-10.

LPR - 61
Dwell - 9 to 15
Tank output - 400
Inline - ? (mid 200's I believe, but could be changed)
No volumizer

I will test the inline pressure tomorrow and try having my tank at least 200psi higher. Any other assumptions on what might be causing this?

[WDP-Shooter]

I'm getting about +/- 2-5 (depending on paint match)

LPR - 38ish
Dwell - 12
Tank Output - 450
Inline - Set to shoot 275fps
Fly Volumizer

[shaq787]

lpr -38. thats dam low. does it shoot any slower than when your lpr was at stock settings? and do you chop and how many shotts to a tank.

[WDP-Shooter]

Doesnt chop, just lowered it to here so havent shot enough to get an idea about how many shots a fill.

I'm actually suprised the gun will function that low stock. I took all the shims out and it was at 36-38, cant really tell. On my old speed (03) I had it around the same settings, though the dwell was 19 and it had a modified valve spring in it.

[canyouspellthis]

hah last time i chronoed i got

286 ; 286; 287; 285; 286

[Neo]

mine was roughly:

276, 290, 268, 282, 294

... you get the picture

how long does it take to break it in? ive shot about 3 cases thru mine so far

[WDP-Shooter]

Whats your armageddon set at? If its not at 400-450 (I'd do 450), might wanna try that.

[Neo]

Whats your armageddon set at? If its not at 400-450 (I'd do 450), might wanna try that.

450 is exactly what im using