how do I remove the trigger?

[lhs50lb]

Does the pin on the trigger just hammer out? I can't seem to get it out and the manual is no help. I don't want to hammer on it if I don't have to. Im probably just doing it wrong. I want to adjust the screw under the trigger but I can't get at it without removing the trigger entirely. Am I even doing this right? Im trying to adjust the extra backward travel of the trigger after it fires. Help me. I don't want to pay the money to have someone adjust a screw for me

[TeTra PuNk0120]

ya i think ya gotta beat the pin outa the gripframe....good luck...my gun has a scratch on the pin where the owner before me must have hit it and the screwdriver or pick or whatever he was using slipped and scratched it

[Syentific]

If I remember correctly, one side has a star shape that actuall digs into the frame to keep it in place. You want to hammer from the other of the star shape and towards the star.

That was you dont gouge the other side as the star passes through the frame. Reverse this method when installing.

You can use a nail, I usually try to hammer the nail lightely into a sidewalk to blunt it, but you still want a point of sorts. Remember to tap lightly on the trigger pin and if you are going the right way it shouldnt take much to get it out.

Or just send it to me and I will move somewhere far away and forget my name.

[Emmit]

you can get a small allen key, put it in the slot from the right side, and lightly tap it out towards the left side. (Left side being the side with the LCD screen) It will come out, and then you're good to go

[warpedx]

Be sure to do it that way (waht emmit described) or you will end up ripping the pin through the wrong sid eof your trigger frame.