Lee Van Cleef
12-02-2004, 06:56 PM
ok Just wanted to post my recent experience with my new speed 05-
The first time I gassed up and dry fired, no problems at all.
The second time I brought it to a field, gassed up and loaded up my egg with paint.
Soon a faint leak appeared. It was't too bad, just kinda there. After I switched to the Reloader B, and chopped, of course, the leak became full blown and in moments the contents if my tank had loudly dissapated down the barrel.
I decided it was probably the oring that seals the foregrip to the body, so I didn't tech it then and there.
After some contact back and forth with Frazier at WDP, I took his advice to see if anything was blocking the valve (i.e. paint chips from using the halo).
After reassembling the bobbin, spring, and valve stem, I gassed up and everything worked fine.
Tonite I shot a hopper through it and no leaks.
Just thought I would share my experience if anyone is having leak issues.
later
The first time I gassed up and dry fired, no problems at all.
The second time I brought it to a field, gassed up and loaded up my egg with paint.
Soon a faint leak appeared. It was't too bad, just kinda there. After I switched to the Reloader B, and chopped, of course, the leak became full blown and in moments the contents if my tank had loudly dissapated down the barrel.
I decided it was probably the oring that seals the foregrip to the body, so I didn't tech it then and there.
After some contact back and forth with Frazier at WDP, I took his advice to see if anything was blocking the valve (i.e. paint chips from using the halo).
After reassembling the bobbin, spring, and valve stem, I gassed up and everything worked fine.
Tonite I shot a hopper through it and no leaks.
Just thought I would share my experience if anyone is having leak issues.
later