Fly with Halo B -Chops!! v35 will help?

[feret]

HI!

Hy I have a lot of problems with with my fly combined with the halo B ... It pushes the balls to hard and a have a lot of chops!

I heard that that the vicoryboard will help me? with the v-35 software the halo B will have less torque ..i heard?

please give me feedback

:drink:

------------
Red Dust Angel Fly
MacDew Conquest'04
Halo B
Dye Ultra Lite

[trickytrix]

I would check a couple of things and would not recommend the Victory board. If you're going to upgrade, get an Empire reloader B kit:

1. Ram stroke
2. Ball detents

[paintreliever]

yep yep..i say same thing

[Bogie]

nope, at least not in my view. in my experience i would definetely get the V35 board for the halo and everyone i know that got an empire wished that they would have gotten the halo with v35 but they didnt have the v35 when they got their empire reloaders. empire reloaders slowly put pressure on the ball and if you listen closely you can hear it slightly turning so when you do pull off a decent bps, it just unloads and you get a ton of broken balls. i say get a v35 for you halo b, but hey that just me.

[Snooky]

Have had problems with my Halo with V35 pushing balls so hard that they will split and then cause a mess and/or break down the barrel and also leaving small amount of paint coming out of breach. So in my opinion the v35 wont help the problems you are having.

It has been better since using the lower settings but still going to try the grease on belt suggestion I have gotten and see how that works.

[feret]

I don't want to buy a new loader!!! so empire reloader isn't really an option.. I just want to make my loader more reliable! what about the other board for halo b .. i think it's called angry board.

v35 or angry.... which one ir more reliable

[paintreliever]

v35

[dyes biotch]

Angry.

[feret]

.... got more details? pro/contra.....

[trickytrix]

Do you have the Z code right now? I wouldn't waste the money on the V35. They rip through batteries, and jam constantly, not to mention they're very inconsistent in their speed. The Reloader is hands down the best loading system available. If you're not willing to spend the money to upgrade to a reloader, then don't buy anything. The Z code is the best software available for the HALO after the reloader. I've used them all, and seen them all at their worst, and the V35 is garbage. Good luck finding the system that works for you. Christmas is coming, better ask for that reloader :)

[corrupt123]

i dont know, i've seen more than one fly (including online threads, probably more than 10) that when combined with a halo, and paint that isnt at par, just blow through it. im not sure if it's an official problem, because wth fresh and good paint they shoot fine. but i know, with me and a buddie for example, paint combined with both mine and his flies, plus halos, just gives us paint in the breech and feedneck. not chops, just a lot of cracking, exploding, or generally breaking paint. but than, same stuff in another marker with the same set-up shoots fine. im not sure how, what, or why, but i think it has to do with the amount of force the fly's are putting ont he balls as their fired, aswell as the cycle times.

[trickytrix]

The way any marker is setup is going to affect how paint is handled in the breech. Shorter dwells, longer dwells, higher/lower LPR settings, how fresh the batteries are in the loader, with angels the ram stroke, is the ball rolling back off the detents...etc...

My advice for anyone chopping paint with a fly is to first make sure the ram is set correctly, the dwell at 9, LPR 60, and the eyes on. If after that you're still having a problem, try a buddy's loader, and see what happens. Never hurts to make sure the board is set to SFAST either.

[feret]

DWELL is at 11 LOADERSPEED SFAST LPR is 50 i think
gun was sup up by an Angel Tech. He said that it's ok!
I tried it with an EVo II and had less chops... i will try to extend the spring in the ball detends...the tech said it can help me (he got some spare) ;-))

[WDP ir3 2k3]

I think it is the Ram stroke becuz my fly was doing the same thing and see what ur LPR is at to