Breech hindge pin removal

[Mindjob]

Im stripping my gun for anno. I have EVERYTHING out except the pin for the breech. I reamoved the set screw from the front and back. Which way should it come out? To the front or back? And, what is the easiest way to get it out? I was going to use a finishing nail to loosen it.

Thanks

[Holysokz]

hehe if your talking about the pins that hold the roto breech. Then from what i heard is that if you get the long screws that holds a LCD noid in. You can screw them into the back of those pins and pull them out.

[russ]

make sure you clean the tube well, remove all the debris, and lubricate it with a penetrating lubricant before you try and take it out.
there is a good chance that since the LED is quite old, that the pins are rusted in there, and may not come out that easy.

good luck