Angel Live... but doesnt shoot ?

[steven]

ok yesterday i went to the PB field to try the fly I putted on the Low pressure tank and it had a leak ! in the back back plate of the gun so i thought that maybe if I shot a few times it would just go away or something.. so i putted the angel in Live and putted a paintball inside BUT it did not shoot !... can somebody explain me why it happend ?

id apreciate it alot ! :patriot:

[tgaffner]

Your Solenoid is leaking. Tighten the Set-Screw on the top of the sight rail, that will fix the leak.

As for the Live and not firing, make sure your TOE Screw is in far enough to trip the Opto Sensor to shoot.

[steven]

thanxs ! ill go to the field in a while to try it again.. let hope it works !

[BuNkErEd]

my friend had the leaking from the back plate problem with his fly. turns out his hammer was just really loose. if tightening the solenoid cover doesnt work, you might try to tighten the hammer.

[kevine]

I had a similar problem with my marker not shooting. My trigger was set way too close. Just backed out the toe screw and used the wheels. Then I just fine tuned it with the toe screw a little more. Works fine now.

[steven]

ell it stil has the leak.. i tighten the solenoid as much as I could and the leak continues.. maybe its the hammer.. but ow specificaly do i thighen it more ? do I jsut turn it aroud or something ?

and one more question .. what tools do I need to use to take the clip of the regulator so i can makethe gun hish pressure ?

thanxs ! :doh:

[crashdan]

snap ring pliers..... home depot sells them...... and try lubeing the ram orings( unscrew it) just make sure you reset it properly

[tgaffner]

If is still leaks, I would grease the rubber gaskets and check the Ram O-Rings.

[mixar]

stuck in demo mode?

[steven]

well it keeps leaking ill have to check the ram :get: . oh and its not in demo mode. i ts in mode 1

[steven]

ok i think i got it fixed and know i have the angel upgraded to high pressure but the problem appears know that when i shoot.. i like takes itstima to go back like around 5 seconds until it shoots again any one know why ?

[mixar]

try cleaning your eyes

[mikec1221]

I am having the same problem. My Fly is brand new. I took it to Impact for them to set up and they did a great job. But now when i turn it on Press the button the grip says Live , and the red light just keeps blinking but it doesnt fire.

[crashdan]

ensure the plug is pluggedin to teh board....

[Hep]

Steven got a hold of me a couple of days ago through IM and it was his solenoid "sol" plug that was in the intellifeed "hop" socket. Common problem.

[Angel_Fly_Boi]

hey i was wondering wut is debounce i hav never figured it out??
thanx guyz

[WDP ir3 2k3]

Put it in mode 1 and then put ur gun in live then hold the tigger for 2 sec tell ur here someing see if that works