Pressure out of mini reg ???

[corellon]

How i can know the pressure out of the mini reg of my Speed 05 ?

thank

[Major Morningwood]

Get the angel tool kit. It includes an air guage and adapter to check your lpr pressure. It also includes a ram adjustment tool and several other important tools you will need to tweak your angel. Cost varies but you should be able to get it between 49-65. It seems actionvillage has it for a good price. Out of the box my lpr pressure was 63. Be forewarned, Ken reccomends not changing your pressure seems anywhere below 60psi your balls will begin to drop premature. If you need a lower pressure get a new bolt and valve kit. It will also lower your pressure and possibly help your accuracy. The newton evolve would be a good start

[ufcd98]

corellon - you've raised a great question, which I hope to answer for myself soon. The gauge which comes with the angel tool kit is designed to measure the pressure the LPR sets things for, but tops out at 160psi, which is often much lower than what many of our miniregs are outputting for the the operating pressure. I've purchased a spare tube-to-gauge adapter and am waiting for a 0-300psi ashcroft gauge to arrive and i'll find out what the minireg is doing for the operating pressure. good luck to you.
steve

[KEN CRANE]

Get the angel tool kit. It includes an air guage and adapter to check your lpr pressure. It also includes a ram adjustment tool and several other important tools you will need to tweak your angel. Cost varies but you should be able to get it between 49-65. It seems actionvillage has it for a good price. Out of the box my lpr pressure was 63. Be forewarned, Ken reccomends not changing your pressure seems anywhere below 60psi your balls will begin to drop premature. If you need a lower pressure get a new bolt and valve kit. It will also lower your pressure and possibly help your accuracy. The newton evolve would be a good start

action village? na buy one from one of the sponsers here at the top of the site. to check your mini reg pressure make a tool to adapt to a lpr tool and adapt a gauge that reads 200-600 and put ut on the exaust valve side of the 05

[esandov]

Where can I find a tube to guage adapter? And which pressure guage is recomended for acurate readings? I think something like this would be indispensible to speed owners.