PDA

View Full Version : Yet another "only shooting 12bps" thread


nfg2k
11-11-2004, 07:55 PM
Setting are all stock

When there's no air and i turn off the eyes, i hit 20bps no problems. Air it up, dry fire with eyes turned off, hit 23 no problem. Fill up my halo with new battery's, turn it all on, can't get over 13bps..

I'm probably gonna take it up to trevor at badlands but i wanna see if theres anything else i can try..

*EDIT*
I was shooting with about 400psi to the reg, and screwed the minireg screw in all the way, then screwed it out about 1-2 threads cause i was low on air, had about 800psi.


Software is 3.0

But it just came straight from an evil factory guy, so for some reason it doesn't make sense...

dynastySSS
11-11-2004, 08:07 PM
you probly need the newest softwear.....contact one of the mts so they can hook you up

nfg2k
11-11-2004, 08:20 PM
thats where trevor at badlands comes in, but i dont wanna make the trip :pisss:

Winnebago
11-11-2004, 11:22 PM
try dropping your dwell to single digits... i had same problem when i had dwell above 12ms. version 3.4

dynastySSS
11-11-2004, 11:39 PM
thats where trevor at badlands comes in, but i dont wanna make the trip :pisss:


mail maybe :dunno:

nfg2k
11-11-2004, 11:44 PM
i could
im gonna fill up on air tommorow, and put the dwell to 8 or 9

i don't know if this would affect it but i barely had air going into the gun, enough to cycle without sticking or anything though..

mt help would be nice

r6will
11-15-2004, 11:11 PM
i have 3.0 and my dwell is 12 and i can shoot it 19 just fine with eyes on

Frank_McCrank
11-17-2004, 04:37 AM
these threads just keep coming, cant someone sticky a thread with all the possible solutions?

rebelace12
11-19-2004, 11:40 PM
The solution is to raise your lpr to 70-75 and lower dwell to 7 and check from drop off and see if it chronos right. If it wont get to 290-300 then raise your dwell and check again. This is the problem have tested it on more than my force fly. dwell on 12=14bps dwell on 7=25bps.