PDA

View Full Version : Angel leaking plz HELP


Maxpayne2k4
11-09-2004, 08:00 PM
I recently brought my angel to a known Tech Shop who formerly worked with WDP
I asked the gun tech to do a mini reg rebuild because he says its thye main cause of 1st shot drop off. and its cheaper then buying another inline. I had to go back the next day for another check up because I was shooting very very loud and it just seemed not right; he set my LPR to 85, after he rebuilt my reg and adjusted my LPR to 65. After I got it back I had a leak I couldnt even shoot a single ball out properly. He diagnosed the problem to the Ram, after checking the Ram the Valve and the selinoid. He said the Ram was the culprit and looked like it was about to break off around the Head the way it wiggled.

After Replacing it he gave it back to me and said it was good to go. But I was Smart and asked to air it up before I PAID. but it still LEAKED. He stripped the gun infront of me replaced everything the Valve, the replaced the Ram, he checked everything in the inside and said theres no shavings, and it still leaked. He SAID YOUR ANGELS CURSED and gave it back to me. I just felt numb after hearing that.

After taking everything out and replacing it with my originals he said my best bet is to send it to Performance.

Ken im begging you please help.

Frank_McCrank
11-10-2004, 03:57 AM
leaked from where?

Maxpayne2k4
11-10-2004, 09:12 AM
I cant tell. seems to be in the breech. The gun tech thought it was the Ram. but it wasnt. checked the valve and the selinoid.
He doesnt know where its comming from either.

bigfootimp
11-10-2004, 11:26 AM
When he changed the valve did he use the old valve stem or a new one? I only say that because I had the same problem with a 2k2 lcd. Changed the stem valve with a new one and problem solved.

Maxpayne2k4
11-10-2004, 11:34 AM
He used the old valve stem. but i dont know if thats the problem.

Talon
11-10-2004, 11:59 AM
Make sure that when you look into the breech you can see part of the valve stem extending from the valve body. If that is not the case, you may have the wrong valve stem in your marker. If that is fine, take the volumizer off the left side of the marker if you're looking at it from the front, if you have one, and check to make sure that the valve stem spring and spacer are aligned correctly and fit together well. Let us know how that goes.

Maxpayne2k4
11-10-2004, 01:35 PM
The valve stem is in correct alignment with the marker.