Force fly problems with lpr ! help

[Dreamland]

Hey folks, I'm from germany and I'm a proud Angel force fly owner.

I have a few problems with my baby. Difficult to trigger my angel fast (not my fingers), ball breaks/chops and drop offs in fast strings.

First: If i have the eyes on, i can't go faster than 15 bps. I have tr 1 and higher, Hopper sfast and used a Halo Victory and a Reloader B. every speed is faster

If i make the eyes off, the gun is faster and its easy to trigger faster. But i have ballbreaks and chops. With all Hoppers!

Last weekend it was hard, cold weather and a lot of paint breaks and chops! And slow speed!

Today i control my settings and my lpr. And I was wonder!!
LPR was set on 50 psi! And no shims on my lpr!!

I add 1 shim and the lpr was set to 68 psi.

It is recommendet 60-70 psi. I'm now on the end of the range. I will set to 60-65 but no way! if i remove the only shim the psi drops to 50 psi.

Any way to set it right???

[firemedic30]

They say that the shims are "approx" 5psi. But I was the same way. I would have fluctuations of greater than 10psi on one shim. BUT.....be sure that there is just one shim there. They really like to stick together.

If that doesn't fix the FSDO, then clean both the LPR and the mini-reg, real good.

As far as the chopping, I had the same issue with my converted Speed. I just made sure that I had a full charge, (don't trust the meter) and the chopping issue went away.

I hope that helps, let me know whatht else I can do?????