PDA

View Full Version : Velocity

WdpAngel2000
10-30-2004, 06:56 PM
Having trouble getting my velocity higher than 200 on my 01 Lcd its in the 198 range and I need it up above 260 cause paintball just dont break at 198! Do you think its the dwell it still at the factory setting of 14 or do you think my on/off isnt in far enough( I twist it as far as I can without tools)
faceplant44
10-30-2004, 07:01 PM
Do u have hp or lp tank?
three fut nuthin
10-30-2004, 07:52 PM
that will answer it...also make sure ur turning ur reg screw the correct way...and do u have the correct LPR setting?
WdpAngel2000
10-30-2004, 08:59 PM
No clue whats the difference
monkeymanlcd
10-30-2004, 09:23 PM
Go to ur local shop and see it they have the angel tool kit and check all your setting on your marker. Mine was doning that for awile and I found out my lpr was at 80 psi. Your lpr needs to be at 90psi, and the input pressure to the gun from the mini reg needs to be around 400psi.
WdpAngel2000
10-30-2004, 09:27 PM
How do u change ur lpr
monkeymanlcd
10-30-2004, 11:42 PM
To rase the psi on it you add shims. To lower it you take them away.
three fut nuthin
10-31-2004, 08:25 AM
yes, and did you ask the difference between LP and HP? if you did, LP is low pressure, and it puts a lower pressure into the marker. it will only provide enough input if your running an LP marker. if its HP marker then the HP tank puts a higher amnount of pressure into the marker, causeing it to shoot more consistant *sp* its early...
JesusM.D.
11-11-2004, 04:40 PM
something i've also seen alot is bolt lubing. This will cause the bolt movement to be very stiff. If you've lubed the bolt, wipe it off and make sure it still feels smooth in the breech