Leak

[Fu_ness]

I have an Angel 2k2 LCD.
Recently, I had to get the LPR replaced. AFter getting it fixed, I took the gun outside in my yard, and fired a couple of rounds. It worked great.

The next weekend, I went paintballing. When I turned on my valve, it started leaking really bad where the in-line reg meets the main part of the gun. I shot a couple of times, which made the leak go down a bit.
Anyway, to make long story short, I went and bought the Angel o-rings, hoping that it was an o-ring problem. It still leaks. Anyone have any suggestions?

[Angelboy2000]

Hey I have the exact same problem with my Angel 2k1 LCD. I recently took it in to have it fixed at the local Paintball shop. They said they put over 100$ into it. When I brought it home, it was leaking from the exact same spot. They had not fixed it.

[monkeymanlcd]

Might want to check ur flashtank o rings (flasktank is the thing ur reg screws into) When you take off ur reg and take the screw from the inside of it and the plate and it will come off the gun then. It will come apart into 2 pieces. Check the orings there. Thats the only thing that I can thing of that could cuz a leak there.

[Fu_ness]

I replaced all those o-rings. Thats why im still confused. Is there ANYTHING else right there that could be creating the problem??

[three fut nuthin]

when i got my old LCD the same thing was happening. make sure u have the reg screwed all the way into the flash tank.

[Wdp Lcd 2k1]

i had the same problem i just looked at the o ring to see if there was any problems and i just put a little dab of shocker lube on o ring and put it back to gether and it worked fine for me.