trigger problem

[Flaming_Gooch]

i have a 2k1 dark lcd. my trigger sticks like every time i pull it and i have to unstick it to shoot again. can anyone help me?

thanks in advance.

[LX Sport]

have you tried removing the handle and making sure the spring is there, and CLEAN!

[Flaming_Gooch]

yea i took out the trigger and cleaned it. there is a spring in there and it is clean. and does anybody know where i can get a cobra trigger brand new but not for $40 directly from cobra's website. thanks for all your help.

[RgMekanic]

no, but you can get a really good knock off of the cobra made my NW for like 15.

I think its www.nwpaintball.com but not 100%....just google it up

[Flaming_Gooch]

ok thanks ill be sure to check it out.

[RgMekanic]

np :smiley:

[Flaming_Gooch]

does anyone else have any suggestions to help me fix my trigger sticking problem??

[slinkyonrampage]

make sure everything around the trigger is where it is supposed to be, like nothing is blocking it

[Flaming_Gooch]

i did and im 100% positive that everything is in the right place. i am at a complete loss at what to do. i think it might be the actual trigger but thats only cause i cant think of anything else. keep telling me idea or solutions guys i appreciate it.

[drkanglr]

Did you take the trigger all the way out? Is there any rust on the pin? Look for where in the travel it sticks. Does it stick even if you have the frame off of the marker body? If the spring is too weak, you can try stretching it out and putting it back in. Some people trim the springs, but if it's too short, it won't have enough energy to return the trigger. If the trigger seems to be sticking on the side of the frame, make sure that the pin is in all the way and that the trigger is centered. Check for any cuts, scratches or burrs on the trigger itself or the frame where they are in close proximity to each other. If you find a burr or scratch, take the trigger out and sand the area down, then put it back on and see if that was the problem.
And the NW trigger is a darn good Cobra knock off.

[paint_solija1224]

what if you lost your spring? i was taking mine apart and i lost it
can i use a spring from a pen?

[Crazy Train]

Sometimes when you use loctite, it leaves a residue on the adjustment screw and it can cause the trigger to "stick." Had this happen to my speed but not lcd.

[SON OF SAM]

what if you lost your spring? i was taking mine apart and i lost it
can i use a spring from a pen?



a pen spring should be fine as long as its roughly the same size. May need to trim it to get the proper "spring"

[|3@NZ@1666]

is the switch damaged? or the wires crossed??