Talfuchre
10-04-2004, 09:11 AM
Okay -
Recommended into the marker by the manual is 400 psi.
The manual also states that a medium Volumizer will net sub 150 psi operating pressures.
Here are my questions:
What is the operating pressure (post mini-reg) of the Speed 05 without the volumizer?
If you are told to set the mini-reg at 350 to set the LPR pressure at 65 (per the manual) what is the operating pressure of the LPR when you turn that pressure down to run the marker at 300 FPS?
Also:
On the new trigger is the opto - spring portion attached to trigger using screws or some other afixing device?
Thanks,
TF
Recommended into the marker by the manual is 400 psi.
The manual also states that a medium Volumizer will net sub 150 psi operating pressures.
Here are my questions:
What is the operating pressure (post mini-reg) of the Speed 05 without the volumizer?
If you are told to set the mini-reg at 350 to set the LPR pressure at 65 (per the manual) what is the operating pressure of the LPR when you turn that pressure down to run the marker at 300 FPS?
Also:
On the new trigger is the opto - spring portion attached to trigger using screws or some other afixing device?
Thanks,
TF