u wanta sell ur angel? nething to 450$

[marshal842004]

looking for a lcd 2k1 , 2k2, 2k3 w/e thats at least got some stuff on it but just write down what u got. or i can trade my impy, maxf lo (horizontal) blade, evil back cap, all american back freak fron 16 in. vision, venturi bolt, new bolt pin, 03 stickies.

[HTRacing03]

I have 2k1 drak angel w/ cp barrel, gladiator reg, shocktech drop, system X on/of, dye bolt, dye low rise, 45/4500 tank for 400, also egg 2 but the lid is broken

[amelot]

2002 LCD with upgraded eclipse 45 frame, shocktech bolt, dye boomstick, and matching boomstick like barrel, and revy with intelifeed, two volumizers, never used Reds 5+1 pack. Gun is Copper (dodo brown) very nice, very classy
looking for 600

[marshal842004]

i dont need harness or revy, only would buy if u can drop it to 450 ish

STILL LOOKING FOR ANY LCD ANGELS

[amelot]

Hey e-mail me at amelot@cox.net
I could do 500 plus shipping and keep the boomy.
E-mail me maby we can work something out with the impy

[slinkyonrampage]

i got a 2k1 LCD i will sell for 450 and it has some upgrades and i will include some other stuff 2. email me-- sharpshooter370@yahoo.com or PM me. It might b a couple days befor i check it, but iwll try to get back 2 u

[paintball2k3wdp]

http://www.angel-owners.com/showthread.php?t=32227

this gat mows like no other. comes with upgrades and tons of extras. complete set-up! i have lots of pics.

aim: paintball2k2ac
email: sector9style@yahoo.com

[mlinder]

2k2 dark polished silver with some ups catch me on aim sneakyspeed04

[thyroyalbadness]

Ive got a 2k2 angel lcd with new lcd screen pc board and membrane and battery only has about 15000 shots on it! Comes with dye boomy!

Lemme no!

[Angel007]

gotta 2k1 Dark Angel LCD-great condition-lots of ups, email me at Drawmcgra@AOL.com for more imfo and pics

($375) best value

[Dend78]

2k2 lcd black and chrome
cp volumizer
turbo trigger tuned up by rocky
c&c ball detent
new board 6k shots on it
turbo trigger makes it shoot ropes

asking 400 make me an offer

[silversurfa]

03 CnC Bonebrake Ir3 angel

http://webpages.charter.net/silversurfa2680/DSC01195.JPG

http://webpages.charter.net/silversurfa2680/angel1.JPG

700 shipped

ups include
Low rise Clamping feed neck
Cobra flat trigger
Brand new COPs sensor
mid drop

And all Bonebrake internals


Bonebrake-modified WDP LPR
Bonebrake techs begin the IR3 modification by replacing the LPR with a Bonebrake-modified modern LPR assembly. Before installation, the LPR piston is re-polished for a more accurate seal, the housing is machined in three places to enlarge the air chamber and an LPR conversion spring is inserted to span the new distance between the LPR and the exhaust valve.


New valve guide for better seal
Next the valve gets some individual attention. Bonebrake Airsmithing will resurface the valve guide sealing surface to promote a more accurate seal, and, when necessary, will replace the exhaust valve or guide completely.


New Bonebrake hammer
The stainless steel hammer is the next addition to a Bonebrake IR3 Angel. Replacing the standard brass hammer with a material of this strength not only eliminates brass shavings inside the gun, but also ensures that the bolt pin will not dent the hammer because of its front end. This strong hammer, at full stroke, will dead-end into the valve guide—not the gun. These hammers are produced in limited quantities to ensure quality and precision.


New Bonebrake IR3 bolt
The key to the Bonebrake Angel mod is the Bonebrake bolt. The bolt has been especially designed to give a player a noticeable feet-per-second gain and to improve gas efficiency. Bonebrake Angel bolts are made out of a material called PET, which is a much harder material than common delrin bolt material. PET will NOT absorb oil or water and will not expand in heat (“swell inside your breech”). Also, because of its hardness, PET is less likely to bond with dirt particles, which means less breech wear.

New fasteners and o-rings/specialized cleaning and tuning
As part of all Angel modifications, Bonebrake Airsmithing replaces all fasteners and o-rings, meticulously cleans every part of the marker and tunes the entire marker. In tuning, Bonebrake Airsmithing covers all the bases by checking the electronics, the LPR pressure, the snap ring, the ram stroke, the chronograph consistency and the operating pressure. If necessary, Bonebrake will replace any WDP electronics that are under WDP warranty. Each and every Bonebrake marker is covered under the Dan Bonebrake Airsmithing Limited Warranty. Bonebrake Airsmithing stocks one of the largest selections of WDP repair parts in the United States and offers WDP warranty services.


Let me know if your intrested

[n30ncabbit]

Silver Dark Angel LCD
Super fast SPEED Trigger MOD by TAG (TheAngelGuy)
16" All American Barrel
KREEM Naked Lady Silhouette Drop Forward
Angel Wings Rail
Low Rise
Absolutley Stunning!

Hate to part with it. It is a stunning marker and scarey fast! More pics available upon request.

Thanks.

http://progressiveconcept.com/dkangel.jpg

[n30ncabbit]

$450.00

Silver Dark Angel LCD
Super fast SPEED Trigger MOD by TAG (TheAngelGuy)
16" All American Barrel
KREEM Naked Lady Silhouette Drop Forward
Angel Wings Rail
Low Rise
Absolutley Stunning!

Hate to part with it. It is a stunning marker and scarey fast! More pics available upon request.

Thanks.

http://progressiveconcept.com/dkangel.jpg