Aaaahhhhh!!!!!!

[tman-89]

ok. I took out my lpr piston and I think I messed up the spring stack order when I put it back together. I thought had it right (based on what I read in the manual, but I didnt have the manual on hand, and no internet) so I put everything back together. But the end cap started to seize up when it was about 2 full turns into the body. I was being stupid and thought I could tighten it more, and ended up stripping the hole for the allen key. now I cant access my lpr, and since I dont know if I put the springs in the right order, I cant put any air into it (it could blow the solenoid), and I cannot play. I already emailed Jim at Impact telling him the story. If you could help me with this situation it would be greatly appreciated.

[tman-89]

not the mini reg, the lpr

[jb12]

The spring stack in the LPR should look like this )()( sorry 'bout you stripping the end cap, that sucks. You might be able to try a stripped screw remover (can't think of the actual product name) to get the end cap off.

[mrtheoutlaw]

I think you've done enough damage trying to fix it yourself...wait for jim at impact to respond to your e-mail, you're probably gonna have to send your gun in to him.

[paintballbum]

the allen wrenchs with ball bearings work pretty well

[tman-89]

yeah, they are called easy outs. but Im gonna let jim do it. I live real close to the shop so luckily I wont have to ship it. Thanks guys

[AngelBoi]

time for a new end cap :sad:

[tman-89]

yeah, good thing they are only $8

[wings of fury]

shouldnt you have a spare if your using a vomlumiser?

[tman-89]

Im not yet. and besides, I cant get it out, so it wouldnt make a difference. the good thing is, I will get it fixed this weekend at impact painball and prob. get a volumiser put on