help with gun plz

[angel_ir3_dude]

okey i just installed a new a4 board in my ir3 but the gun doesnt shoot, help me please i have a game this weekend.

[Vantage_TeS]

Gonna have to give a wee bit more info then that. Does it turn on ok? What happens when you try to shoot?

[angel_ir3_dude]

okey, the gun turns on and has all the modes and stuff fine but when you pull the trigger the is no click meaning a shot, i dont know what is wrong.

[Vantage_TeS]

When you are in safe and pull the trigger, does the backlight come on?

[angel_ir3_dude]

no it doesnt

[Vantage_TeS]

Your trigger isnt pushing the leaf in far enough to fire. Take off your grip (LCD side) and try pushing the leaf in with an allen key when in life. I bet it fires.

[angel_ir3_dude]

okey i think i found the problem, when i pull the trigger it doesnt push the metal strip on the board back far enoguh, how do i fix that?

[angel_ir3_dude]

yea, it does fire, but how do i get it to do that when i pull the trigger

??????????

[angel_ir3_dude]

one other question what is dwell and tp????

[Vantage_TeS]

Dwell is how long the valve stays open. Just like before that wants to be at 14 on your IR3. TR is bounce. If you have any version below LP3.5 (the thing it says on bootup) you wannt run about 12. If you have LP3.5 you want to run around 3.

Now we get into the wonderful world of leaf bending. You have to take the leaf (metal strip) and bend the middle part out far enough that the trigger will hit it. say its like this now | you have to make it look like this (

Best way to do this is to take an allen key and push the middle of the spring out away from the board.

[Vantage_TeS]

Excuse the quality, I had to use webcam and take screenshots (my digital is about 15 hours from here).

[angel_ir3_dude]

okey ill try to do that right now,and it says lp v4 when i start it up, so what do i want my tpr? 3.5? or 4?

[Emmit]

Vantage is reffering to Fly versions, not 4 versions.

Your TR is totally dependant upon your trigger setup. Before you start bending your spring and risk causing damage you don't want try adjusting your trigger and even go so far as to move trigger pivot holes.