New to angels...

[TrashDoG]

Ok so I just wanna get this right before I order my Speed.

I'm ordering from paintballgateway.com and it comes with the check it unimount. I'm also ordering a 68/45 Xfire tank, and a Halo B.

Do I just screw in the unimount and im good to go??? Do I need a macroline or whatever too??? Al the guns I've bought before have already been setup with everything on em so I'm not sure xactly what it is I need... I wanna use this thign the day or day after I get it lol, so I wana make sure I order everythign I need at once.

[LifeForce4]

Those are the same questions I have. I had to buy a uni-mount and macro kit for my cocker befor I could use it.

Kyle

[PBsmurf]

It comes with Macro And Fittings. All u need to do is hook it up. And buy an ASA.

[TrashDoG]

thanks guys, so with the check-it unimount ill have everything I need to shoot?

BTW Smurf, thanks for puttin my forums in ur sig!! :)

[PBsmurf]

Your welcome!

[Vantage_TeS]

Make sure the tank is a LOW PRESSURE tank (450psi output), and you get mounting hardware with the unimount (screws to go to gun). You will get a nice piece of black macroline and a fitting in the box with the angel, along with your 9v, spare orings and allen wrenches.

[MVpaintball]

Well if your getting the 05 Speed then you don't get a charger as it's just 9V, but they do include a duracell 9v

And all the weird size orings are for fitting your hopper on properly

[AngelBoi]

I cant emphasize how important it is to have a Low Pressure tank. DONT ORDER THAT HP TANK UNLESS YOU PLAN TO BUY A REG MOD. Angels and HP dont go well together.

[Frank_McCrank]

buy a reg mod? you can mod it yourself for free...

[2k4kev]

I think hes takig about the reg on the tank

[PBsmurf]

Lol Noob Question.
All my guns i have bought from the proshop they hook up the fittings and all of that. Is there a important way of doing all this installing the macroline and putting on the fittings. Do you screw in the fittings all the way and how do u put the Macro in the Fitting.
I know its a dumb question but ive never dont it before.

[canyouspellthis]

Lol Noob Question.
All my guns i have bought from the proshop they hook up the fittings and all of that. Is there a important way of doing all this installing the macroline and putting on the fittings. Do you screw in the fittings all the way and how do u put the Macro in the Fitting.
I know its a dumb question but ive never dont it before.


You put thread-lock or something similar on the fittings screw the fittings in all the way, btu dont over-tighten, and you can just push that macroline in the fittings, but to get it out you push down on the top part of the fitting and pull the macroline out.