Fly intellifeed halo/reloaderb

[Outerice]

Hey Russ when the heck is your mods to the halo/reloaderb going to be ready. I really would rather have my mt. do the mods then to send my loader to someone else that claims to be able to do it. I just can't wait any longer. I've been hearing that its a simple mod and there are alot of people that claim they could do it. so what is taking so long. any one with good info let me know what the deal is. And i also needed some parts for my halo. If any one knows were i could get some new internals let me know. thanks

[dynastySSS]

the process takes time there are a million threads on this and i dubt that he will reply...just wait but a v35 for now and ull be fine

[firemedic30]

:dito: I agree. Just get the V35 for now! It is a great addition to the HALO. I love mine!

[wetworx101]

what's a V35? Sorry, I own a reloader b and I dont know...

[tgaffner]

Victory Board.

[anjordan77]

yeah we have intellifeeded or "Riotfeeded" a few flies already...they work like champs...

but a v35 is the latest odyssey board but your reload B is just as good if not better. v35 claims a burst up to 35bps and you can set different speeds.

not worth it since you already have a reload B in my opinion

[Jetwing@Impactpaintball]

i got a reloader b and it is just super fast... was able to get up to 30 bps on the rof meter...try doin that with the v35 =)

[BuNkErEd]

its funny because with my old v35, i couldnt get past 22, which is where i used to get with my stock halo. i slapped my reloader b on there, and at setting three, ive hit 26. setting 2, the most i get is 22. the reloader feeds awesome.

[tgaffner]

I love my Reloader B!!

[pookai]

Word on the Reloader B.

[latin king]

I love my Reloader B!!
me too!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[FeedRIOT]

Not to blow your mind..but i hit 25... so far with A RIOTfeed halo b. think i can do better. Have heard of 38 but only heard, not seen.

Deadpool

[dynastySSS]

38 not possible buddy....gun capped at 31.....and i seriosly doubt some1 pulled 38 are u sure u dont mean 28???

[deamon32]

http://members.cox.net/1deamon32/riot1.jpg
http://members.cox.net/1deamon32/riot2.jpg http://members.cox.net/1deamon32/riot3.jpg
awsome mod done by awsome people

[FeedRIOT]

NICE RASTA!.. o and he had a different bolt kit. But thats what he said, we have seen 28... only with our RIOTfeed, so far.

Ben

[deamon32]

its a intellifeed, but they call it a riot feed since team riot does it, link is http://www.richmondriot.com/Riotfeed.htm

[deamon32]

there is none, intellifeed is intellifeed, but its hard to get an intellifeed for the halos, these guys are one of the only people i know of that do halos

[deamon32]

do me a favor and read the site i gave you, and then answer your own question

[t2zone1]

it says it doesnt burn the Halos but is doesnt says anything about the force board
THANKS

this is a copy and paste of the info on riotfeeds website!! thanks!!

RIOTFEED HALO B!!!

No longer will you have to worry about your eyes being dirty, or your hopper having to hear your marker. No longer will your board fry, or have to use 6AA batteries. You also won't have to worry about your battery running dead when you leave it plugged in over night. Now you will only need a 9volt to run your halo at a much faster rate. Feel free to use the typical rechargeable 9volts because this will work all the way down til your battery is sitting at about 5 volts. We estimate you will only have to change the battery every 7 cases of paint or so if using a 9volt. With the 04 Angel Fly, Rasta, or Joy Division you can adjust the settings on how long your halo feeds and when it feeds. We recommend the following settings. Have it feed for 0.10 seconds, and have it set on A1. you can customize it as much as you want which makes this the smartest hopper on the market thanks to WDP's awesome features. Finally maximize your Angel's performance by allowing it to shoot as fast as you can with no hopper problems.

This will not drain your angel battery, it will not fry your angel board. It completely works off the halo's battery source and we recommend a 9volt or 4 AA in series. with 6AA it is insanely quick and i'd say almost too quick which will most likely cause more problems than anything else. so drop your weight, drop the cost of batteries, increase your rate of fire to be completely customizable by your a4 fly or other angel with Riotfeed already setup.

[deamon32]

thanks for that post, people on AOG groups help each other, but the person that needs the help needs to also take that extra step and read some information for them selves. especially when someone points to where exactly to read.
it seems like a lot of the new people on the board follow the trend of not wanting to read, i dont know why that is

[WDP ir3 2k3]

its funny because with my old v35, i couldnt get past 22, which is where i used to get with my stock halo. i slapped my reloader b on there, and at setting three, ive hit 26. setting 2, the most i get is 22. the reloader feeds awesome.

same here my 35v only can get 24 bps and i have tr at 22

[FTHEREF187]

does the force fly speed have the hopper settings??? i want this for my force speed

[Tormenter554]

Dude Whats The Deal How Do You Do The Riot Mod Where Is The Intellifeed Wire Connected To On Your Halo Please Let Us Know Thanks

[FeedRIOT]

The force fly can be ROITfeed... but would need to drill your rail.... O u dont conect the intellifeed to the halo directly... And u would need to spend 3 days touble shooting all problems before you HooK IT up. We already did that for u. Spend the cash, let us do it. O and for the MT at San Deago that said "those ROITfeeds chop paint." the only 2 hoppers were not choping because of the drop in temp, eggs and THE RIOTFEED. all the rest were including the GUN. This was for Angels only of corse. O and the only non-choping paint out there was evil. But we knew that too late.

[FTHEREF187]

i mean the force fly speed.... it doesnt have an lcd screen!

[FeedRIOT]

Sounds Like A Speed With Eyes

[FTHEREF187]

yea thats what it is... and i want riotfeed for it so iw as wondering if it had the hopper settings...???

[FeedRIOT]

nope runs off of a 9volt batt and has no settings.. thats y it was only 900...

[FTHEREF187]

it doesnt run off a 9 volt and it was 1200 for the force fly speed (www.angelforce.tv)