cyborg8767
09-02-2004, 07:15 PM
Ok i have been making induivdal threads trying to get my probelms solved and it was working. My angel has worked great until a few recent days. Im gonna tell you the whole story and if it be nice of someone we could go over all the possibltys and i will try and elmiate so that i can figure out what the probelm is.
Ok it started with me getting bad drop off so im like ok lets grease and lube the gun. Thanks to one of my idiot friends who said he looked it up on the internet for me (he didnt get what the guy said) he told when u flip up the rotor breach and put grease in there. So im like ok i put i a squrit in there and move it all around. That did nothing but cause probelms since that is not the way. I couldnt get my velocity above 240. So i finally got my tool kit today. I backed out the hammer and ran a battle swab in there and got a long of crap out. Next i wiped down all the grease off the hammer. I went into the lpr area i got to shims. I couldnt figure out how to go any further and once i found out how it kinda scared me to try so i put it back in. Now the snap ring feel out of the back of where it goes. I tried to put it back into place the best i could. I then lined up the ram good and tried it out. Ok im hereing a litle bit of leaking out of the front area ( i dont think i put the parts i took out in right) and the gun wont shot all i here is the 14-way doing stuff. Last time i heard the 14-way doing stuff it and it not shoting it turns out my snap ring was bad. I inspected it and looks good. Am i just putting it in wrong. Or is it something else. Now i believe it was the shims i got to, or it could have been the stuff infront of them. (note i going by the diagram in the instrucions). Should i just see if there in right or is there a certian order they go in.
I was so happy with my angel until a 2 days of playing. I feel like such a noob. Im getting to the point where im going so crazy that when i get the money from selling my tippy that i send it to new jersey and get the full serivce clean job and have them change anything that is messed up. So please what should i do.
Ok it started with me getting bad drop off so im like ok lets grease and lube the gun. Thanks to one of my idiot friends who said he looked it up on the internet for me (he didnt get what the guy said) he told when u flip up the rotor breach and put grease in there. So im like ok i put i a squrit in there and move it all around. That did nothing but cause probelms since that is not the way. I couldnt get my velocity above 240. So i finally got my tool kit today. I backed out the hammer and ran a battle swab in there and got a long of crap out. Next i wiped down all the grease off the hammer. I went into the lpr area i got to shims. I couldnt figure out how to go any further and once i found out how it kinda scared me to try so i put it back in. Now the snap ring feel out of the back of where it goes. I tried to put it back into place the best i could. I then lined up the ram good and tried it out. Ok im hereing a litle bit of leaking out of the front area ( i dont think i put the parts i took out in right) and the gun wont shot all i here is the 14-way doing stuff. Last time i heard the 14-way doing stuff it and it not shoting it turns out my snap ring was bad. I inspected it and looks good. Am i just putting it in wrong. Or is it something else. Now i believe it was the shims i got to, or it could have been the stuff infront of them. (note i going by the diagram in the instrucions). Should i just see if there in right or is there a certian order they go in.
I was so happy with my angel until a 2 days of playing. I feel like such a noob. Im getting to the point where im going so crazy that when i get the money from selling my tippy that i send it to new jersey and get the full serivce clean job and have them change anything that is messed up. So please what should i do.