What Board is on my IR3????

[ultraspank_tiny]

i bought a used Dark IR3 from a guy and i was wondering what board wa on it. when i turn the gun on it says MEM 4???

[twizted]

Its an IR3 board. its not the newest tho. the newest is MEM6

nate

[ultraspank_tiny]

can you get a fly board for this gun???

[twizted]

you sure can, but the fly board is $300, if its the 31 bps cap u want go to www.angelservicecenter.com

then go to the a4 parts and you will see the A4 board for $85 then the screen is $50. BUT that is NOT the fly board.

Nate

[jb12]

The fly board is pointless unless you have the eyes, harness, etc. to use w/ it. If you want the eyes contact one of the MT's about the retrofit. It's around $400. If you want the high rate of fire, get the A4 bolt. You can use the screen you already have so it's only $85.

[ultraspank_tiny]

can i use the screen i have on my ir3 board with the A4 board. and can i use the MT trigger or the A4 slayer trigger in my ir3????

[jb12]

You can use the screen you already have

Yes, you can, that's what Russ told me would work and it did work.

[ultraspank_tiny]

what about the triggers????

[jb12]

The trigger has to be for either a speed or IR3. The MT's and slayer will not fit unless modified to fit, Russ has modified some and is supposed to modify more, but as of now, they won't fit.

[DarkHope]

For the MT triggers russ can machine them down for 65$ to fit in there...keep in mind thats just to make it fit, not the price of the actual trigger...

The slayer wont fit, but if you talk to an MT with a machine shop he mite try and experiment withya, but from what I hear its bigger than most of the other A4 triggers...otherwise ide go for the cobra stick trigger, and get a magnetic triger mod in it for like 35bucks or whatever it is...it would prolly equal what youd pay to have an MT machined in, but id go with the stick trigger and mag mod...talk to an MT close to you to see whats up tho...