angel4 help please.

[bnaka]

ok, im new to this forum but not forums in general so i could really use any help possible. i am a first time angel owner and i am going to play on saturday morning for the first time with the a4. i took it in to get macro and they filled my tank a little to c if it worked (by the way i have an angel air system on my gun, dont hat me cuz i didnt choose it, i got it for $100.) anyway, the angel has no volumizers and i was wondering what i need to do to the tank to make it work with the gun at best? like how and what do i do to the angel air to make it right for the gun? also on my angel, on the bottom of the reg where the macro connects theres a leak, i was wondering what might b the problem and how i can fix it by saturday. and the last thing i need help with is on the right side of the angel air reg where the macro connects, there is a leak coming from the silver plate being held in by a allen screw and i was wondering what that does and y it might b leaking, it only leaked once then i shot the gun a few times then it stopped. i really appreciate ur help people and like i said i play in less than 2 days, so asap replies is awesome. thanks a lot.

[Vantage_TeS]

OMG? Simpson? Did Jessie hit your head tonight when he body slammed you?

Ok the leak coming out your SAFETY VENT is from too much pressure being outputted from the tank. Use the button on the AIR to scroll thro the menu untill you get to output. Make sure that is at 450psi. Anything over 800 tends to leak out the safety vent. The screw in the front of the AIR is for adjusting the output pressure. In (CW) ups the pressure.

No volumizers is fine, make sure you run 450psi (or close to) from the Angel AIR, then adjust your minireg till you pass chrono.

[bnaka]

ok so with no volumizer i should set the output pressure to 450 on the angel air and i do that by the front of the air reg? and i should b set to go? what about the macro line leak? its not coming from the screw in part i think. its coming from where the macro goes into the gun, maybe some sh|tty macro?

[AngelBoi]

Yes. Try my setup b4 saturday.

tank output 400psi (dunno how to adjust on a AIR)
minireg at ~200
1 shim (LPR at 47psi)
large volumizer
dwell anywhere from 16-18 (LOWW PRESSURE....need high dwell)

That has absolutely no recoil, but is a tad loud. But personnaly, id prefer to hit my target rather than be quiet lol

[Frank_McCrank]

how many shims in the LPR depends from gun to gun...

id recommend the recommended settings... which you can find in its own section.

[AngelBoi]

Rlly? didnt know that....

[twitchytrigger]

I would suggest Kens settings, those have seemed to work very well for a lot of people.