Sauron
08-21-2004, 11:09 PM
Hey guys, I got my 45/45 AIR today. I noticed that the mounting bracket has a bit of side to side play when the tank is attached. I inspected the bracket and tightening down the large brass screw did not remove any of the side to side play. I inspected it and noticed that the one corner that adapts to the tank is rounded off on the LCD side...it looks like it's supposed to be, looks to be milled that way and anodized, so I'm hoping that's normal.
Anyway, the tank has a bit of side to side play on the bracket, and I noticed that there is a bit of a gap between the reg and the back of the bracket. Is there supposed to be a gap there?
Would some blue loctite be safe to use inside those threads, or is that section open into the regulator itself?
Anyway, the tank has a bit of side to side play on the bracket, and I noticed that there is a bit of a gap between the reg and the back of the bracket. Is there supposed to be a gap there?
Would some blue loctite be safe to use inside those threads, or is that section open into the regulator itself?