...Help me not regret my descision...

[jstahura]

Ok, i recently purchased an angle fly.... but action villiage messed up and sent me the joy division marker... sooo yay! but i called them and told them.. and they took 200 extra out of my account... anyways.. that all aside... i hook up my nitro duck lp 68 4500 tank... start the shooting... ball break... ARH... the dwell was at 9.. soo i figure it was the messing arond i did first .. soo i reset the thing and read some on here about setting it up.. i put it the dwell to 13 and the tr to 5ish as the forum said... now... the paint was pink yucky paint that had some goop on it... probley a bad decision to use.. but i figured the angle could handle it... couple easy shots and then i walked... ball break... break break break break gun stop shooting.. lol nice huh... sooo i'm kinda pissed right now.. i do'nt know what to do.. soo i come bakc here check the setting and reset.. then put the dwell to 12 and then tr to 12ish like it said.. then i put it on demo mode... sooooo i put the tank back on.. start to walk works good for say 10 shots.. and then burrrrrrrrrrrrrp.. the bolt sticks forwards and stopps shooting... wierd? i don't understand... does it consistantly.. what am i missing? do i need to oil? do i need to set the lpr? set the reg? i don't understand.. help! i own 2 cockers... an orracle w/ nexus kit and worrblade and a karnivor turtled... .... please make me happy to be an angel owner.. :(:(:(:(:(


cliffs..

shoot gun chops paint
shoot gun chops paint worse
shoot in demo mode bolt gets stuck forward and goes burp...
starting to hate myself for switching from cockers...

[guest1337]

were u using a reloder b? or a victory boarded halo?

the force feed could be crushing the ball?

is the paint crappy?

is your ram adjusted correctly?!?!

in demo, your gun is probly starved for air, do u have teh volumizer on?

whats your lpr?

[Emmit]

You should not be chopping what so ever...

additionally I think that AV should've sucked up their mistake, but then again that's their customer service not mine.

As for the burping in demo mode...well many people have said they have burping problems in demo mode. Demo is there to show you how fast the marker can really shoot/cycle Sometimes this does starve the marker for air. Do you have the volumizer on the marker? Is it on the proper side?

Something I think you should do would be to reset the board. The manual tells you how to do this, you just have to scroll through the internal menus then hit reset. This will put the board back into factory defaults and give you a clean platform to start with.

Before you go shooting anymore paint make sure that the eyes are clean and not obstructed. Do this by using a little bit of air on the eyes, then make sure that your marker passes the eye test found in using the external buttons in the grip frame to scroll through the menu. This will allow you to determine if the eyes are lined up and working properly.

[guest1337]

word, i said something emmit said

im on my way to being a wdp tech :clown:

[guest1337]

but u should also amke sure ur ram is adjusted properly, becasue if its not, it will casue u to chop


find out how to adjsut your ram by searching, ken rote a report on it, read the manual, or ask politley

[jstahura]

oh yeah sorry .. it was halo b w/ zcode...

volumizer is on the opposite side of the lcd... soo if u look right at it.. it is on the left side...

i am resetting it now... i don't wanna use the crap paint anymore.. it was brass eagle paint ... sooo it wasn't anything good.. but still the paint the first time was the paint my local field usses for yourneys.. i don't have the name w/ me..

i'm lookin for a pball to do the eye test...

[Emmit]

you don't really even need paint to do the eye test, just open the breech and then slide your finger through the eyes.

as for paint...well Golden Turkey is pretty crappy paint.

[jstahura]

lol i agree.. but u know how it is... ...

[jstahura]

ok... i turned the ram thing a little more.. when i open the breach it has a slight catch.. i think that is how it says.. says somthing aobut resistance... that to me is light resistance.. i donno if someon wants to correct me.. i am resetting and doing the eye test...

[jstahura]

eye test passes and marker is reset..

[Emmit]

no offense dude...but do you know what you're doing here? You're starting to mess with internal things that should be left to experienced people. Ram adjustments are not something you can just do without some knowledge of what you're doing.

[jstahura]

put the hopper to sfast and mrof to 15...

[jstahura]

haha... well the guy.. *points* told me too! LOL! sorry i'm used to cockers.. i will put it back.. i followed the pictures and read the directions in the book! lol...

[jstahura]

WHAT HTE HECK! 14bps.. this thing is mocking me.. lol says FASTER FASTER.. geez... i have slow fingers... lol i can't get used to this trigger... i'm out of lp air.. :( i will have to get some more tomarow.. another $5 for teh cause

[Solmyr]

Well, I know when I get my Fly I will send it to KEN to install the MT trigger and to setup - tune up my FLY. I am still waiting on a price for all that so I can let you know once I find out.

[jstahura]

thanks.. :peace:

[booboo808]

One think I must say, is yesterday, when I first used my Fly, I was AMAZED at how clean the barrel and breach were. It look BRAnD NEW. Handled all the ☼☼☼☼ty SEVERE paint at my field with out breaking a sweat. i love this ☼☼☼☼ing gun, w00t

[idirtryder13]

also, make sure your eyes are on too.

[Oaklanddogs187]

Correct me if i'm wrong, but I thought I read somewhere that you should break the marker in before changing the settings? If i'm incorrect correct me, but could this be causing the problem?

Brandon

[Emmit]

it is very much recommended that you shoot quite a bit of paint/air through the marker before you start tinkering...