PDA

View Full Version : flash tank gauge and low pressure

Outerice
08-10-2004, 10:39 AM
I have a force fly and for some reason my flash tank gauge always has to read above 300 to shoot around 280 fps. Can any one help me out . I would like my flash setting to be around 180-190 if possible. I've removed shimms and read the book but nothing seems to work.
az'rail
08-10-2004, 11:59 AM
im still kinda an angel noob but i think you can rise the dwell. let us know your set-up (tank,volumizer,lpr psi,current dwell). im pretty sure some one can help.
Outerice
08-11-2004, 05:07 PM
i am trying to get it to as low pressure as possible but still shoot nice. I have an angel air with the largest volumizer for the force fly dwell is 12. lpr pressure is what ever it comes stock.
Emmit
08-11-2004, 06:42 PM
You say that you removed shims from the LPR, but do you actually know what you're LPR is reading? You really need to have a gauge on your LPR to test it to determine what it's set at, this will allow us to determine what your optimal dwell should be at and help you get your pressures down.
Outerice
08-12-2004, 06:49 PM
what is the lowest the lpr can be set to still function with ease. What is the lowest that you have done or heard and with what dwell setting.
BlueAngel
08-12-2004, 08:42 PM
what is the lowest the lpr can be set to still function with ease. What is the lowest that you have done or heard and with what dwell setting.

I think your missing the boat. our point is, there nothing we can say to help you without knowing your LPR's true output. you need to get ahold of a LPR gauge.