speed with sensi off and with halob

[pbmakeslifegood]

hey its kind of a long story but basically my sensi is broken... i dont mind to much because i plan on getting my speed Retroed soon.

anyways i used my speed with sensi off and with a halob and it worked perfectly no chops and incredibly fast... then i went and shot it again with the halo and sensi off and it chopped once.... might have been a double feed.. it was also really old paint

so my question is i have a tourny coming up soon and i was wondering if its ok to use the halo on my speed? will it double feed? is there a way to adjust my detents so it wont double feed again?

any help appreciated thanks for the time :cool:

[WDP ir3 2k3]

If you ues ur halo a lot of ur speed and it was ur first time for double feed and + u are uesing old paintball i think u sould be fine

[Biglee1221]

I turn sensi off and use my egg with z board and I have never chopped. So I guess it will be fine with the halo also

[BlueAngel]

egg is not true force feed like the halo, they are very diffrent
if you are getting double feeds, streach the detent springs a little
Thats what I did, and I run my empire reloader B on speed 3 with no prob

[pbmakeslifegood]

well i have a z-boarded egg and i out shoot it alot... like with quick bursts

can you give me more detail on how to strench the springs? i dont know what springs you mean?

thanks for the help guys

[BlueAngel]

the screw on the sides of the body, below the feedneck
open them and streach the springs inside a little

[pbmakeslifegood]

ok cool thanks

also.. i have this thing from radio shack that i can plug the angel charger into then thse thing plugs into the wall

thats ok to use right?
its not gonna fry the gun or anything?

[BlueAngel]

cars provide a wide varity of voltages(in and aroud 12VDC),chargers (120v to 12 volt)
are genereraly pretty tight.I wouldnt worry,but if you want to be safe order an authurized charger from a master tech. thats the offical way to go!(and keep your warrenty)

[winter001]

I'd be careful about the radioshack adapter, I've heard some bad stories about people frying chargers/boards with that thing. Its best to get a regulated adapter from the sponsors

[Winnebago]

as long as you get the same voltage output and enough amperage output from the wall adapter, you'll be fine.

i'm sorry but the laws of physics (electricity) > WDP.

[winter001]

Yeah, I get that as long as the voltage and aperage output are right you will get the same results, but thats the problem with the radioshack adapter, it doesn't provide consitant power. If you hooked it up to something like a UPS, I'd be fine, but straight out of the wall you may run into problems. Thats why a regulated adapter is where its at, I don't screw around with any of my high end electronics, the angel is the same. Not every one has problems with the radio shack adapter but many have.

[BlueAngel]

I Bought my adapter from Ken at Performance Angel

[speed demon 666]

i use mine with a halo b with sesi off.since i did rubber band mond if i put sensi on it will bounce and shoot when im not even pulling the trigger.its ok to turn sensi off with a halo ots works good

[BlueAngel]

i use mine with a halo b with sesi off.since i did rubber band mond if i put sensi on it will bounce and shoot when im not even pulling the trigger.its ok to turn sensi off with a halo ots works good

As long as you have the cap set reasonable, I have mine at 20 bps w/empire reloader speed 3, and this works fine for me.
Also keep fresh battries in the loader!