my lcd is having velocity problems at high bps

[phouseinc]

my lcd shoots about 13 bps when i get it up that high my balls start loosing velocity down about 150 i can tell becouse they go about 10 feet and drop. it is fine until i start shooting over 5 bps. someone please help :sure:

[thog94]

What is your LPR set at and what is your input pressure from your tank?

[phouseinc]

i dont know what my lpr(how do u find that out) is set at i am running a high pressure 800-850psi tank

[drkanglr]

What kind of tank is it and what size? To get the LPR pressure you need to use an Angel Tool Kit w/ a gauge, available at all of the sponsors listed above ^^^^^^

[dj2white]

sounds like his tank isnt recharging fast enough.

eric

[thog94]

I talked to him via PM's and I think that it got worked out, but I haven't heard any good or bad since then.

[phouseinc]

i returned the lcd and got my $ back and i wanted to know if an angel speed with the retro a4 fly mod volumizers total freak kit halo b victory board 68/4500 pure energy hp tank for 850 would be a good deal i am also wondering if i shoot a high pressure on a speed would that screw up my velocity the guy that is selling it said that he did a minireg mod to the reg and restacked the springs so that the gun would accept hp tanks has anyone heard about this mini reg mod ever have done before and worked with a hp tank?

[dj2white]

yea bro, good deal on the speed. as for the high pressure I'm not so sure. one of the more knowledgable guys around here will tell you about that. but the speed with all the mad ups and stuff is a hell of a deal. sure it isnt stolen? :lol:

[Jouster]

The HP mod is perfectly acceptable, although it will lower the number of shots you'll get out of the tank by a factor of 10% or so.

A Speed with the Fly Mod is worth >$700 just by itself. Grab that gun; if you don't want it, I'll take it. ;) Although see if you can get the guy to drop his price by $100; you don't want a PE tank, anyway, and it'd give you a couple extra bucks with which to go out and buy a real tank, like a Crossfire, and you could get it in the LP configuration, to boot. (And, yes, the HP mod to the mini-reg is fully reversible.)

Jouster

[MXPBman806]

hmm ok, check your tank output, should be high pressure...umm if you open and close the breach check to see if the pin on the bolt snags the hammer, if so you need a snap ring adjustment. That made mine have shoot down.

[Jouster]

hmm ok, check your tank output, should be high pressure...umm if you open and close the breach check to see if the pin on the bolt snags the hammer, if so you need a snap ring adjustment. That made mine have shoot down.
s/snap ring/ram/ based on the test you describe. Nonetheless, he's right to point out that it's important to adjust the ram and snap ring.

Jouster