Mini Reg

[FreshlyRimmed]

Do you just lube the oring seals when you clean and re lube your mini regulator? Or do I grease up the shims as well.

[crashdan]

no the shims are fine and...... u dont need 2 threads 5 seconds apart

[paintballmaster]

Actually it's a good idea to lube the shims in the reg a little and of course you lube the o-rings.

[Emmit]

okay I'm going to assume that you're all reffering to the springs in the minireg as there are no shims in the minireg.

as for greasing them, no you don't need to.

Grease and oil help prevent rust etc, but you'll get oil on them in normal oiling of the marker, and unless your air source is really bad you shouldn't have rusty springs anyways.

[C.Carles-AOG]

Grease the springs and you're making them magnets for dirt. Oil shot through is better. Yes, the O-rings do need grease.