Identity Crisis
07-18-2004, 07:48 PM
Ok so my angel was a gigantic gashog, to the tune of 1000-1100 shots per 90/45 fill. So i finally get my hands on the appropriate tools, and check my LPR setting, its set at 50 PSI. Knowing the optimal range is around 85-90. I set the shims to this. and reinstall everything.
We shoot it around a bit at the field i work at, mostly dry firing and some paint. I heard a leak commin from the gun, i shoot again it stops. So i open the breech the next time it does it and it was comming from the breech port in the gun, not near the ram but where the air comes into the gun from the valve. So i check the pressure and it wound up bein a bit high, and i took out 2-3 shims and gassed it up again.
It stopped for a bit, but today when i was playin it was worse like before when i fired it would stop leaking but this time it just stayed leaking for an random amount of time. All i did was take the front piece of the LPR out of the gun and nothing else. Anyone have any idea?? I really dont want to send it in to the master techs if i can avoid it. I dont wanna be without my gun for a couple weeks.
We shoot it around a bit at the field i work at, mostly dry firing and some paint. I heard a leak commin from the gun, i shoot again it stops. So i open the breech the next time it does it and it was comming from the breech port in the gun, not near the ram but where the air comes into the gun from the valve. So i check the pressure and it wound up bein a bit high, and i took out 2-3 shims and gassed it up again.
It stopped for a bit, but today when i was playin it was worse like before when i fired it would stop leaking but this time it just stayed leaking for an random amount of time. All i did was take the front piece of the LPR out of the gun and nothing else. Anyone have any idea?? I really dont want to send it in to the master techs if i can avoid it. I dont wanna be without my gun for a couple weeks.