Filling AIR.

[PakmanRevd]

I went through to about page 6 under the AIR section and found a lot about flash filling. Not really any info on how to help it. Say I'm at a field with "New fast filling air equipment!" Should I ask them to fill my tank slowly? Don't want to screw up my new addition to the family :smiley:

Thanks in advance!

[Vantage_TeS]

Back the adjustment screw out all the way, and then start off the fill slow. Once its filling ok you can speed it up a little, but you dont want to "slam" the air into there.

[PakmanRevd]

Yeah, but at my field they do it for you. they have the policy of no one allowed in air station (unless the owner is gone).

So i should just ask them to do it slowly?

[Vantage_TeS]

Yessir, and make sure that you turn the adjustment screw out before you give it to them.

[PakmanRevd]

K thanks.

Are the push button ones bad? I think that's the only ones they have.

[Vantage_TeS]

Should be fine. Just turn it to 0 and go just like any other tank. If its a turn lever one, dont SLAM the air in the tank (some people are foolish and do this. This is bad even on a preset and can cause tank failure, aka DEAD MESSY STREWN BODYPARTS).

[PakmanRevd]

Yeah, cool so I got it all figured out now.

Thanks for the help!