Question About Tank Compatibility

[woogman]

i recently purchased a demon speed. i have a 68 3000 preset tank. i know that the speeds are low pressure guns, but if any one has any tips on how i could get this air system to work for me, it would be great. thanks

[IwanaANGEL]

yeah do the mini reg mod
if you have a high pressure tank you can modify the mini reg to lower the spring stack pressure so you may adjust the gun below 300 fps.

1) remove all pressure to the gun.
2) remove the mini reg from the gun by unscrewing it counter clockwise
3) look into the top of the mini reg and locate the circle 'c clip'
4) with a circlip pliers remove the circlip
5)carefuly turn the mini reg over and tap it on a padded surface
6) you will note that there are cuped washers stacked on top of each other they look like this: ((()))((())) (not in this order)
7)remove 1 of the cuped washers (springs) from the mini reg stack
8) reassemble in reverse order and re chrony.

[woogman]

thanks for the help