Warped R11 Bolt for the LCD and IR3

[Hep]

No doubt about it, this delrin bolt adds
20-30 FPS, WITHOUT having
to adjust your outgoing pressure.

The R11 Bolt features a stainless steel dowel
and aluminum insert for maximum durability
and weight efficiency.

[5150]

Yea. . . Those look pretty good, I mean we need some one to do a test on them. Im deciding weather to get the Cobra or the Warped bolt.

[Bigdog]

How secure is that insert?

Last thing anyone wants is to have a bit of their bolt stck in their opponent's forehead, it tends to limit the possibilities for rematches.
:evilgrin:
How much do those go for?

[baloo911]

WDP strongly advise not to use metal bolt in your marker...The choice is yours but I ll stick to their advice

[5150]

lol, bigdog but i highly doubt that that that will ever happen, lol

[Bigdog]

Originally posted by 5150
lol, bigdog but i highly doubt that that that will ever happen, lol


As long as its not as flimsy as the system x bolts.
It could happen, metal insert comes loose, knowing my luck it'll be when trying to bunker the chief of police's kid, then BAM meet your new roommaet BUBBA, he likes it when you hold the soap for him.
Just like dolphins, everyone thinks they are so cool, but the only reason they save people is that the very act of biting somebody in half would be viewed in a very bad light by the other people that would witness this. Never trust anything or anybody that smiles all the time - they are hiding something.

Don't ask me what this has to do with anything, just believe it, and if you see a dolphin, get a BIIIG stick & hit it as hard as you can. (My anti conservation bit for the day) Limited water reserves, and who knows what those lot are doing in there. :sick:

:clown: OK, I'll calm down now, does anybody know if Warped will have a stand at the campaign cup?

[warpd1]

bigdog you seem to know to much about bubba!

[5150]

lol, sweet saying!!!!! I see what you mean.

[Bigdog]

Originally posted by warpd1
bigdog you seem to know to much about bubba!


I live in fear of him every day, its the only thing that stops me from taking an axe to those people on the underground trains, you know the ones - smell like they once heard ofe the concept of a shower back in '85, but didn't take it, then they want to stand right next to you & stare at you, but the voices tell me "If you hack & slash, you'll meet Bubba".

Sorry for hijacking this thread, but this is fun.
Oh yes, does anybody kow if warped will have a stand at campaign? I would like to check out these bolts up close.

[wes_12546]

they will

[pbwizard]

well i just ordered one of these bolts and i am playing this Fri. soo i should get it on like wed or thurs. I will get the info up as soon as possible. I have the stock bolt and a new designz bolt to compare with. Hope it works.

[5150]

Can you order dirrect from Warped?

[Hep]

Originally posted by 5150
Can you order dirrect from Warped?

Yes you can from any of their stores.

[srubz]

Hi I just got the R11 bolt I'll let you know howit works out I have a dark angel IR3 angel A.I.R runing at 450psi 285-290fps with my mini reg Vel. screw flush LPR 95psi..??:clown:

[WarpedKid02]

Does anyone know in the near future if the bolts will be out for LCD's?

[C.Carles-AOG]

I'll post the instructions to gutting the mini-reg in the LCD forum.
Hope it helps.

[poobrownhorse]

Originally posted by WarpedKid02
Does anyone know in the near future if the bolts will be out for LCD's?

I believe you can use iR3 bolts in an LCD (but im not 100% sure).
I do know that you CAN NOT use LCD bolts in the iR3 though! (you will chop your cops sensor)

[5150]

I learned that the bad way, I chopped my rod, luckly it was only the rod, 5$ sensor is like 45$, the guys at Cobra saved me 40$, I was gonna buy the whole thing, then i told them that i used an lcd bolt and chopped that mother right off, then they said "You only need the rod" so i ordered today and it will be here on friday. I love the MAIL!

[Hindean]

Originally posted by WarpedKid02
Does anyone know in the near future if the bolts will be out for LCD's?

this bolt is designed to be used in both the lcd and ir3

[Rocknutz]

Yo, i've tested them and there being offered on my Series .. You won't be disappointed....Rocknutz

[andronikos916]

do you know if we can buy these bolts (R11) from the world cup?

[Hindean]

Originally posted by andronikos916
do you know if we can buy these bolts (R11) from the world cup?

you could probably get some from Eric at the cup....

[Eric Roberts]

R11 bolts,

hey guys, I will have R11 bolts at the cup. Also you will be able to get the bolts at the CCM booth. The CCM booth sells cockers and other stuff related. If you can't find any there come by the Avalanche tent and see me there. Eric Roberts

[poobrownhorse]

Any update on when you are shipping them for those of us that are ordering directly from you? :D

[Emmit]

okay...so I'll be swinging by the CCM booth (they make some sweet looking pumps too) to get the bolt then...

[Eric Roberts]

To buy directly from me I have set up a Paypal account. The link to my account will be eroberts20@yahoo.com. The bolts will be $31.00. the extra dollar is just for shipping. I haven't even done one sale through it yet. I will try to get it working fully this weekend. If you have any local stores around where you live that you would like to carry the R11 bolts tell them to email me at eroberts20@yahoo.com The bolts are avaible in these colors:
Black delrin with:
red insert
blue insert
black insert
gold insert
silver insert

White delrin with:
red insert
blue insert
black insert
gold insert
silver insert

But anyway, have a look at the cup and compare to all the other bolts on the market for the angel. I don't knock other people's products I just try to make a product that works superior to stock, plus has better machining quality, and over all looks.
ERob,R11

[epic]

wouldnt the ss pin ruined brass hammers?

[Eric Roberts]

the stock bolt has a SS pin.

[tgallo]

Hey Eric did you get my email regarding my bolt problem?