OK I have a 2k1 LCD Mamba and itssss...

[OldmanPaintball]

Everyonce in a while it goes " phoooot" and then the next shot will be fine. I noticed it has a red anoed ram in it and was told when I bought it that it had "speed" internals. Is the ram my problem, I have adjusted the snapring and all the other ram related pieces and still every once in a while it does this "phoot" thing. The other strange thing is shortly after obtaining this marker I switched bolts and some sheared the pin off the bolt. What I am getting at is this whole dilema related to the use of "speed" parts or is my ram just worn out?

BTW: Anyone else out there with a Mamba have problems with their ball detent touching the bolt. I seem to be missing a spacer of some sort.

Please help me.....


OMP

[IR3-ANGEL]

About the detent/bolt. Its fine if the bolt hits the detent.

[OldmanPaintball]

The trick is the bolt hits the detent housing. Not just the ball. I talked to cobra and I am missing a little spacer. I "farmered" one together. I will check my LPR pressure tonight.


OMP

[gik4]

yeah, there should be a little oring around the detent when ya screw it into the gun

[dark2k2LCD]

well the "phoot" means you have inconsistent velocity which is a common symptom of a loose snap ring. You might wanna reset yours

[Pottorf]

there should a oring on the dentent? mine doen'st have one is that good?

[Vantage_TeS]

Bad LPR.