Tool Set? Tool Volumeizer???

[Holysokz]

what is the difference as in what can you do with thest things. I know the tool Kit has a gauge but what s the differeances in these 2 things as in service wize.

[Emmit]

There were 2 pieces that completed the "volumizer" set. 1 piece contained the tools to adjust and tune the LPR the other contains the tools necessary to adjust and remove the Ram. You would need to purchase both tools to accomplish all necessary tuning and adjustments to your marker.

The biggest selling point on those IMO was their convienence factor. They were always right on the marker and you didn't need to take up space in the tool box. I think they may have cost more than a tool kit on it's own would cost however.

With either set up you are supposed to be able to perform all necessary adjustments on your marker.

[Holysokz]

Hhmmmmmm... i guess i can shove out for the lpr then not to expensive. Just need to tune the gun. PLus always having tools with you is a good thing.

[Holysokz]

Can ayone tell me if the WDP Angel LCD Pressure - Gauge Adaptor http://www.pbn5.com/paintball/paintball.mvc/p=1002768 can be used on a led and it works just like the tool kit with the big gauge. Right? Or Wrong?

[Emmit]

Myself and another user who used to post here tested one of those against my tool kit gauge and found it to be off by almost a bar and half. That was quite a bit of pressure difference in the 2. The best thing that he did was he was able to determine what his LPR was using my gauge and then reference that on his gauge so that he'd be able to determine any LPR problems. I would not trust those small gauges for any tuning purposes. I still strongly suggest just ordering the tool kit. You can leave the Ram extraction tool home if you're not using an IR3 or previous model as it becomes obsolete (no where to screw into the back of the Ram for removal). So that will minimize the amount of room it'll take up in your tool box.