Help Me !!!!!!!!!!1

[guest1337]

heres the deal

i lowered my lpr to a nice 35-40 ish and it was shooting fine but then i got sum bolt stick, so i decided to higher the lpr. i kno about the 2 shots left in gun so i unscrew the reg out a little to let the air out then screw it back in. wen takin off the little cappy thingy over the lpr, for some reason there was still air and the thing went flying. i found all my pieces thankfully.

wen i put it all pack together, added more shims. i go to gas it up. AND THE SOLENIOD IS LEAKING. :( :(

i thought maybe a shot would help it. but then that made the leak go to the flashtank. well a little slit above it. then im like hmm maybe one more shot, then the leak goes back to the noid. :(:(. i kno the noid is working because its clickin, and shooting, BUT IT KEEPS LEAKING, and then the leak goes to the flash tank, and sometimes the ram but that was once.

can anyone help me, or explain wat happened.



also wen shooting it was only going 1bps but i think i fixed that. bad connection to the noid. but thats all better because its clicking wit no air.



HELP!!!!!

thank u very much who ever can asnwer this!! ill buy u a beer or 2... in 6 years


p.s. sry about my poor teenager spelling

[Vantage_TeS]

Leaking from the noid is probably from too much pressure going to it. What is your final LPR pressure?

The leak on the flashtank in the square is an LPR leak. Take the body out and grease the orings, looking for nicks etc. Might be related to the too much pressure problem.

[guest1337]

vantage u dont kno hwo much i love u !!!! u answer everything for me!! i wanna meet u and give u a cookie

[Vantage_TeS]

lol ok. I am at Ken's store in Cape Cod every night this week.

[thog94]

Leaking from the noid is probably from too much pressure going to it. What is your final LPR pressure?



I wonder how we figured that one out? :scratchhe

[guest1337]

but see, i put the same amount of shims and washers as before

i had a brian fart, i forgot about pressure and noids :doh:

its been a long week :blue:

[Vantage_TeS]

Haha thank you TK, yes I experienced that problem with my LCD and TK checked my LPR and it was too high. I didn't check it since I dinked around with it and screwed the pressure on it.

[thog94]

Haha thank you TK, yes I experienced that problem with my LCD and TK checked my LPR and it was too high. I didn't check it since I dinked around with it and screwed the pressure on it.


Your fault for trying to do the cocker mod;)

[Vantage_TeS]

Its not the "cocker mod" it just uses a cocker spring. I could have cut the stock spring, but I figured it wouldn't work anyways. It was just something to try.

Ah yes one more thing. The spring itself didnt screw the pressure, it was the adjustment of the LPR (the wrong way :lol: ) I ran out of air in my SCUBA and didn't get to check it.

[thog94]

Whatever mod you did, funny stuff happens when your LPR is in the 120 range:doh: