Carbon Fiber Back Plate

[bc69atkillbuzzDOTcom]

We were wanting to know if anyone would want to buy carbon fiber back plates for the Angel. We already make them for the Matrix but we don't know if any Angel owners would want to buy them? Here is a pic of the Matrix. Please let use know and if there is enough people wanting them we will start producing them.http://www.killbuzz.com/kbstore/products/tirxpimpplate.jpg

[Transonic]

We were wanting to know if anyone would want to buy carbon fiber back plates for the Angel. We already make them for the Matrix but we don't know if any Angel owners would want to buy them? Here is a pic of the Matrix. Please let use know and if there is enough people wanting them we will start producing them.http://www.killbuzz.com/kbstore/products/tirxpimpplate.jpg
i might be interested if the price is right. even though it won't match my gun i might get one anyway for a potential future angel. keep us posted.

[streetluger56]

im interested but i cant see any pics....? do you have a website i can look at?

[Holysokz]

this isn't the cut the piece of metal and give it that ghetto sticker is it? But other then that yes i am.

[pb4lcfx]

looks tight ill get one if the price is right

[idirtryder13]

yeah. if its cheap price, and real carbon fiber im up for it. it will match my new stiffi barrel!!!!

[IR3-ANGEL]

Thats looks good. I would get one of course it has to be real carbon fiber.

[garrick]

would they be the same price as the Trix ones, $25? maybe I would buy one or two.

g.

[bc69atkillbuzzDOTcom]

That was good enough feedback for us to start making them. The price is going to drop to $15.00 shipped since we got orders from Matrix owners too. This is real carbon fiber, it takes two saw blades to cut one back plate! We will start producing them asap! If you buy one and it doesn't fit right, send it back for a full refund or we will send you a new one. Thanks again for the feedback! Killbuzz.com

[garrick]

let me know when they are ready and I will buy two for sure.

g.

[MoogLe]

they look pretty nice,

i'd have to see one on an angel to make a final decision tho

[garrick]

:neutral: its all about saving that 1/16 of an ounce.

[idirtryder13]

not really, i just want it to match my stiffi barrel!!!!

[bc69atkillbuzzDOTcom]

We will be posting pictures of the back plates tonight! $15.00 set price.

[JIM-ANGELFLY]

yeah ill take one to!! they look bada--!!

[idirtryder13]

pics??? you said last night, but i dont see any.

[bc69atkillbuzzDOTcom]

I have to work until sat. so I will start work on them asap. The first pictures you will see are just the prototype, its just to give you an idea. The carbon fiber we have now is too thick so we had to order thinner sheets and they should be arriving shortly. I'll keep you posted!

[bc69atkillbuzzDOTcom]

Hi all this is Pickle from killbuzz.com I mostly do the website, and keep up with the marketing stuff anyways. This is our Prototype for the angel backplates. Now mind you this carbon fiber is 3mm thick which will stick out a little bit. This is a slow process, I made this one, its not bad I really like them on this marker.

http://www.killbuzz.com/images/angel 002.jpg

We are going to make about 15 then we will make them as they are order due to the amount of time they take. So if you really want one keep your eye open on our site.

[Transonic]

I have to work until sat. so I will start work on them asap. The first pictures you will see are just the prototype, its just to give you an idea. The carbon fiber we have now is too thick so we had to order thinner sheets and they should be arriving shortly. I'll keep you posted!
Do you have a ballpark firgure on when you'll have the thinner ones (that don't stick out:scratchhe )? Put me down for one when they're done.

[Crazy Train]

Yeah, if it was flush with the back, I'd totally buy one.

[bc69atkillbuzzDOTcom]

We will be getting thinner carbon fiber like I said. The last post that I made wasn't me, it was one of my friends, I am at work right now. This is the first time I got to see it and I think it looks sweet!

[idirtryder13]

yeah, i will only buy one if they are flush with the back of the marker. they look sweet though.

[bc69atkillbuzzDOTcom]

All back plates will be $15.75, thats including shipping!

[TonyF]

Hi
Will you ship to the U.K.?
If so how much extra. Was looking at ordering four of 'em.
Cheers

[bc69atkillbuzzDOTcom]

We will find out how much it will cost to ship to the UK and we have just found out that shipping will cost us $3.85 so the cost of the back plate is now $20.00! Set price, it will not go up any more!

[WDGARRETTP]

Stiffi barrells are the bomb... What payment methods do yo accept? paypal?

[bc69atkillbuzzDOTcom]

Yes, but we are waiting on the thinnger carbon fiber right now.

[tgaffner]

You should try making a Carbon Fiber Sight Rail, I would definatly buy a Sight Rail and Backplate!

[padrinot]

ill take one email me

[grayparatrooper]

Those are sweet i want one can we do paypal when will it be ready? Also i have a 2k1 lcd angel with the hole in the back plate for the little key thing will this werk for that one?.... :wowzer:

[Mad.Bv3.0]

I want one for my IR3. Let me know when they're ready to order.

[garrick]

when will the thinner angel ones be ready? I ordered one for my matrix and it fit pretty good. only a little bit of sanding.

g.

[Mad.Bv3.0]

I need one of the thinner ones for my IR3 and one for a Matrix. Let me know when they are ready for order.

[budhall088]

You should def. try to make a sight rail out of it for LCD's. I would so buy one. I'm super interested in the backplate though.

[biftip98]

yeah, im interested in a backplate and sightrail for a speed...

id be all over that

[Daveoh]

I would be interrested in the new thinner one for a speed and also would like to see a sight rail prototype..

[p8intballa26]

lets get some updates please

[ckyxx87xx]

lets get some updates please
...

[IR3-ANGEL]

You should visit their site and get an update there.

[angelflyguy]

I'll take one how much again

[HTRacing03]

Im def. intersested

[seekandestroy78]

please make one, i would buy it and a sight rail too if they ever get made

[Shorty7777]

Idunno what happened to the offer... they aren't offering it on their website and haven't responded in forever so i think it might have fallen thru

[Gunit]

I'll would like one .

[HTRacing03]

I sent a email to them and they said that they arent going to make them because It would cost them to much money.