I know but........

[Mads]

im still having trouble getting my marker to shoot fast. :repost:

I know this is old news, but its getting frustrating.
I tried:
-getting the leaf spring softened up.
-different hoppers. (Halo B´s and evo2 w. Z-boards)
-long trigger pull with different activation points. (early activation and late in the pull)
-short pull.
-changing board.

Am i missing something??? :cry:
I really love the marker, but i could use some more speed, and no...........its not my fingers. It rips when i turn the eye off.

Thx in advance for listening to this prob .........again, and for your help.

Mads

[Emmit]

have you cleaned the eyes???

[Mads]

hi,
yes i forgot to mention that as well, i cleaned it, but only with a clean cloth.
Should there be some kinda solvent on to clean it properly?

Mads

[Foosheezee]

drop your dwell and make sure your TR is tuned properly......

[Mads]

dwell dropped to 10............TR 13........... still the same.
?????
Tried a different halo B 2day, and 2 different evo2 with z-boards, still the same.
Still........thx for the advices, bring them on.

Mads

[KEN CRANE]

dwell dropped to 10............TR 13........... still the same.
?????
Tried a different halo B 2day, and 2 different evo2 with z-boards, still the same.
Still........thx for the advices, bring them on.

Madspm me and send me your ph number and ill call u tonight

[m3ntal]

change your tr to 21 and change your hopper mode to SFAST

[Talon]

Was Ken able to get you all set up?

[Mads]

HI again,
I saw your post 2day Ken, dunno what time it is "over there", but i would´nt ask u to call me, i mean, im danish, and it will probably be a costly affair.

I was told by a tech, that "sfast" is a setting for future hoppers, and that, shooting a evo2, would only require the "fast" setting......???

What trigger settings seem to work for u guys??? long pull, short pull? Someone mentioned that it could be a factor as well.....

Mads

[BadlandsMitch]

set your loader speed to Sfast, adjust your trigger to where you like it and use the toe adjustment to fine tune it, turn TR to 20, and put your EggII on with good batteries, and let her go, it should work awesome! :bigok:

[sniper1111]

Yea I have the same problem it doesnt rip, I have an evo2 I turned it to sfast. But I am having trouble adjusting the tr(which is set at 1), I cant seem to find the blue, and yellow internal buttons?:confused:

[Emmit]

Yea I have the same problem it doesnt rip, I have an evo2 I turned it to sfast. But I am having trouble adjusting the tr(which is set at 1), I cant seem to find the blue, and yellow internal buttons?:confused:
they're on the bottom of the board...take a look in your manual.

[BadlandsMitch]

I'd say if you cannot find the internal buttons thier is probably a problem with the board it self, but I can't see them letting that get through, those buttons are important, and quite obvious......Hmmmmmm :confused:

[russ]

Let me know if you've gotten this thing resolved.
I have an international cell phone somewhere and I pay for the minutes whether I use it or not. And since I don't plan on doing any international events this month and next month, I do have some minutes to burn. I'd be glad to give you a call.