Actual Pressure drop with conversion

[Crazy Train]

When the diverter plate is removed and the sensi hole is plugged in a speed, how much is the pressure actually lowered by? So theoretically, are the working pressures and functionality similar to that of the Fly? Thanks.

[Worr Angel]

When the diverter plate is removed and the sensi hole is plugged in a speed, how much is the pressure actually lowered by? So theoretically, are the working pressures and functionality similar to that of the Fly? Thanks.

On my force 4, the lpr went from 60 to 52. That is how it came back from the MT.

[Crazy Train]

Have you noticed less kick? Efficiency? Thanks.

[Worr Angel]

Have you noticed less kick? Efficiency? Thanks.

I didn't notice any to begin with.

Besides, I haven't shot but about 300 balls through it so I have a lot more testing to do.

[russ]

The pressure you run your market at is personal preferrence.
You can probably run it down to 40 psi if you want.
I personally run mine at 62 because I like it to feel snappy, and have a good kick to it. I like the higher shot count, but that is my personal prefference.
When I set up a marker I have predetermined settings that I use as a base. That gives me a point of reference. Each and every marker is differenent, so their will not be one set of settings that will work for all markers. If you have a point of reference, then when you tweak each individual marker you have a starting point.

[Crazy Train]

Hey Russ, what's your point of reference? 55psi, 16/17 dwell? Thanks.

[russ]

all depends on which platform....

LCD,iR3,Speed,4 or fly

[Crazy Train]

Speed