Breach block o-ring tore

[SuperFly]

The o-ring on the breach block, the one that seals in-between the block and the exhaust port tore. I noticed it had flakyness to it when I was picking it out. Like glue? What is it that holds that o-ring in place? What kind of glue?

[WarpedKid02]

Other's have said just put some superglue on there and it should hold. Put some grease on it, and let it go to work.

[Skream9]

Originally posted by WarpedKid02
Other's have said just put some superglue on there and it should hold. Put some grease on it, and let it go to work.

Yep, I can justify that using superglue works quite well.

[5150]

You don't even need that oring

[capnut]

take the o-ring out.....what?

mmmmmm.....and then Y....did they put it there......??????:puzzled:

[SuperFly]

Well I am tried the grease thing and it won't stay in. So I guess here comes the SUPER glue!

[ZULU]

Of course you need the ORING .. or else you will be very inconsistant and the crono caseu theres a back seal on the breech ..

P.S SUPERFLY.. first super glue .. then when it dries a little grease to keep it soft and well contacted with the breech.

[epic]

you can also use nail polishh..works like locktite just not as well thas what i used for that and my set screws

[discotech]

DISCOTECH
The kind of glue you use is supper glue after you put the o-ring on put a little grease on it like DOW, BATTLE LUBE, or LOVE JUICE grease just to keep the seal from drying up.