balll dropping problem

[pbfanatic101]

when i fire at like 9bs the paint starts dropping, like not going very far, why is this.

[pbfanatic101]

someone plz help, i need an answer 2 day! help!

[KIce]

- Messed LPR/Dwell Setting? i.e. non-working low-lpr-high-dwell-setup -> Verify via menu(dwell) and angeltool(lpr pressure) (normal settings are: lpr 95 psi/dwell 14)
- Give your marker a full charge (takes about 4 hours)
- Have you been providing enough pressure from your HP-Sys?

[Hep]

Run 700 psi or close into your gun and have the lpr around 100 psi first. Dwell can float around 12-14 and see what that does for drop off. You seem to have a lack of air which is attributed to the above. If you use a pre-set tank at 800 psi or so then suspect your lpr to be too low.
Hep

[warpedx]

Once you have verified proper pressures, make sure your tank is screwed in all the way, or try another tank. Then think about cleaning your mini reg. If these things don't fix it, have the lpr looked at by a certified tech.

[acoenfam1]

It's one of two things:

Lpr
Minireg