Speed - Leaking air from the solenoid...

[bjm007]

Ok I've done a bunch of searches and found some info, but...

I've got a slight leak from the solenoid on my Speed and I'm wondering if there's a way to "fix" or re-seat the valve inside or if it's something that you just have to get replaced. I checked the gaskets underneath it and they seem to be fine. I even lubed 'em a bit just to be sure. It seems that air is actually leaking though the solenoid itself... unless I'm missing something. Anybody been through this one before?

[mamba_juice]

unscrew the bolts holding the solenoid together just until it becomes loose enough to wiggle, then tighten them down again. that's the usual fix

[bjm007]

Thanks Mamba...

[acoenfam1]

Tighten down the retaining screw on top of the niod. That should fix your problem.