PSI Question

[Hahaha]

Hi,

I was wondering what the lowest pressure u could get on a Speed was, and how to get it that low

Thanx

[POGI POINTS]

get a tool kit, the stock pressure is 80~ remove lpr and shims, 1 shim = 5psi u can set it to 40~ then put your dwell on 12-15

[Vantage_TeS]

One shim does NOT = 5psi. Each shim is a slighty different size, and therefor changes the pressure by more or less. I have seen one shim drop by 3psi, and the next drop by 13psi. Use your LPR gauge to keep checking the LPR.

[acoenfam1]

One shim does NOT = 5psi. Each shim is a slighty different size, and therefor changes the pressure by more or less. I have seen one shim drop by 3psi, and the next drop by 13psi. Use your LPR gauge to keep checking the LPR.
I've seen the same thing always use the gauge to verify what's actually going on.

[RangerX]

I had my speed down to 48psi. I removed 2 shims, set the reg around 200psi or so, and output from AIR was 350-370. Works great, very little kick if any. But honestly any setting will work good... its all preference.

You'll need a toolkit to do the job, and some patience. It takes time to get it 'perfect'

-RangerX

[Hahaha]

Thanks 4 all the help!
I'm getting a speed really soon, & I was curious.

[koziol]

I've just ordered the toolkit and want to setup my sweety :)
I 've read few topics about setting up and know what the pressures are to be and the dwell.

I'v got AngelForce volumiser and want to setup my gun as fine as it could be :)
Also I own Crossfire LP tank.
1 ) When gauge is screw in right chamber it measure LPR pressure ?
2 ) When gauge is screw in left chamber it measure exhaust pressure ?
But what about if volumiser would be screw in, so the pressures will be different ?
Ken said that it is good to tune minireg downto 200-250 psi.
I've got old "thing" = PMI reg + macroline + on/off asa w/gauge.
3) Would it be able to meassure pressure behind minireg ? Or there is simplier way to check it ?

Please, tell me you quick setup guide :)
I've read almost all topics but don't know exactly how to tune my gun step by step.