PDA

View Full Version : speed leaks and sensi is screwed


OneofUsSpeed
05-24-2004, 09:29 PM
hey i was playing yesterday with sensi on 3 and i was just shooting like 4-5 bps and then it started not shooting all the time and it would only shoot like once every 3 pulls. and not like while i was ripping i would lean out of my bunker see a guy then have to pull the trigger 3 times to get it to shoot. so after slappign it and insulting it i just turned sensi off. then i was ripping on it and choped a ball really bad and the bolt got stuck forward and i had to get plyers in there and rip what was left of the ball out so i could push my bolt back and get my breech open. while the bolt was stuck forward it was leaking liek mad and not shooting but the soliniod was clicking. now i got it all clean and its leaking really bad out of that small circleish hole in the breech. not the long slit. i droped a ☼☼☼☼ load of oil down there and it started gurgling and then what looked liek smoking. but i thought maybe it was the air blowing the oil into there air. but it looked more like someone was smoking a joint in my feed tube. so yeah if anyoen kows what could be going on help me out. i shoudl add that the gun does shoot now.

Want-a-Speed 04
05-24-2004, 09:45 PM
ummm replace any orings that are around the leak

OneofUsSpeed
05-24-2004, 10:55 PM
...thanks.... =/

so anyone eles know whats going on

acoenfam1
05-25-2004, 01:20 AM
First of all with the Bolt/hammer assembly stuck forward that was your leak the hammer was holding the valve open. Sounds to me (from what I can decipher) as if your valve spring might have slipped off the valve and that is what is causing your leak now.