Angel Speed Chopping....!!!

[tmoura]

Hi,

I have a 2k3 blue angel speed, i am running a PMI Pure Energy tank going into my check it drop forward with on/off. My dwell is currently set at 15, my mrof if that makes a differece is at 17 two under my egg. The problem im having is that the shells get stuck in the breech and betwen bolt....the bolt sticks forward and it starts to leak air then i have to squee the bolt back, open breech, take out broken paintball, and thats happenedn like 4 times.

I know this must be in another thread but I DONT HAVE THE time to go looking for it so i ask.

Please help me out

[Want-a-Speed 04]

that happened to me once...i suggest u use sensi

[IwanaANGEL]

yeah put sensi on and remember to calibrate it

[tmoura]

sensi is on......

[Squidly]

If Sensi is on, then MROF is irrelevant. What Sensi setting are you using, and have you tried a wide variety of dwell settings with that mode?

[P A C 1]

open up the grip and hold down the yellow button for two seconds till the led flashes. that shoul go back to factory settings. do u have a zboard in ur egg?

[Solitary Echo]

open up the grip and hold down the yellow button for two seconds till the led flashes. that shoul go back to factory settings. do u have a zboard in ur egg?

This has nothing to do with the bolt sticking and the problems he's talking about. My suggestion is check the modes your using with your Sensi. I'd suggest using Mode 2 if your not already.

[acoenfam1]

What's your LPR at? If it's to low that might be causing problems (not enough pressure to run the pneumatics). Or the ram might be out of alignment.

[J-ROCK]

check the battery of your hopper. a lot of peeps tend to forget about that. not a sermon just a thought hehehehe.