Need help on new ir3!!

[forum155pl]

I orderd an Ir3 2 days ago and angel air to go with it. and i need to know what i should do to set this thing up. i have no idea what output pressures I need and i need to know how to set the ir3 up electronicly thanks

[A.Sanidad-AOG]

When you get it.. read through the manual.. it will tell you everything you need to know to get it up and running...

[poobrownhorse]

Did you get the base model iR3? which color?
Have fun with the new gun

[J.Sweeney-AOG]

I would say back the velocity adjustment screw on the inline reg all the way out (Flush with the outer body of the reg) and then set your output pressure from your AIR to 380. That should give you between 280-290 psi.

Be sure to read the manual like MentalDragon said and make sure you follow the charging instructions for a good first charge. Also, beware that if you are charging through a car cigarette lighter It may be necessary to have the key in the ACC (Accesory) position.

Other than that, air it up, put some paint through it and have a blast. Welcome to our world. :clown:

[warpedx]

One tip I got from Cobra.......Don't plug your Angel into your car, then turn on your car. Right at startup, it will put out a surge of power, which could damage your charger, board, or both.