uh oh..HELP

[RockinTHEangel]

i was fiddling with my trigger/opto leaf and board and it shut off randomly and now it wont turn on...it had half battery and when i click it on it just blinks real fast with green for a blink of an eye then blank again..fried board?need to charge?lcd screen mesed?mesed up 14 way? ah this sucks please help..and if its messed up can it be fixed? or should i just buy a differnt board like an a4? AHHthanks!

[acoenfam1]

Check your LCD screen and be sure the connection is good first of all.

[RockinTHEangel]

which wire/connecter is that?

[Vantage_TeS]

It shouldnt be your screen, as you did not remove it from the board. Make sure that your wires are connected to the right spots on the board, and that they are not loose.

[RockinTHEangel]

none of the wires are loose from the board..just blinks real fast then off...ah...is it the solenoid? or fried board? yeah i didnt take the lcd screen off so...

[RockinTHEangel]

oh i forgot to mention..this happened while i was hooking up my positive polarity mod of Targets..

[Vantage_TeS]

We got it covered ladies and gentlemen, when I got him to check his wires, the connector for his noid only has one wire connected. When he was doing the magnet mod he didn't unplug the wires from the board and it pulled out.

Note for future reference, if you are taking off the grip frame, take the extra minute to pull off the grip and unplug your wires from your board! Now he has to find an electronics repair center to get a new connector put on.

[RockinTHEangel]

can any repair center do it? . Vantage TeS thanks for everything

[RockinTHEangel]

they will have the connector? i thought it was some angel thinkglol...

[ricecrispi]

Take the whole board out of frame and frame off the gun.
Check the connections and make sure no rips, tears, or breaks in the connector or in the plastic.
Take the board and gun into the car and plug in the power connection into the board. Plug in the charger into board and the car on. If the board turns on you are good.
Otherwise it is a connector or bad board.

[Vantage_TeS]

Take the whole board out of frame and frame off the gun.
Check the connections and make sure no rips, tears, or breaks in the connector or in the plastic.
Take the board and gun into the car and plug in the power connection into the board. Plug in the charger into board and the car on. If the board turns on you are good.
Otherwise it is a connector or bad board.

OI do you read the posts at ALL? This is the second one tonight!! THE PROBLEM IS ALREADY FIXED!!!

[Vantage_TeS]

Any electronics place should be able to reuse the old connector or put a new one on. If they have any problems, talk to any of the sponsors (links below the AOG banner).

[RockinTHEangel]

thanks!