my new ir3 fly

[RockinTHEangel]

alright, just got my new ir3 fly in about a month ago. i already got a cobra flat trigger and a cobra fang snatch grip. what other ups should i be thinking about performance wise? and what about looks, where is a good place for fade anodizing?also what do you suggest for settings on COPS and hopper settings. like BAS and sensetivity, and all the hopper settings? thanks, i love my angel it ripps!! i'll post some pics as soon as i get them

[WDP ir3 2k3]

What hopper are u raning. And get a lpr For a Ups

[jesseyo13]

heres what I have my settings at:

Sens:6
Bas:8
Dwell:14
Cmof:20
mrof:20
Hopper:revy

Havnt choped one yet out of 6k on that. Im using a revy and really notice it though when I need to rip on(speed wise). I did however get 14pbs on my revy one time!

Edit: What did you pay for yours? I got my fly for 580.

[ricecrispi]

mrof 13
cmrof 16 wishful thinking
Bas 6
sens 9
dwell 19


Depending on the hopper and how fast you shoot I set the mrof and cmrof.
If you shot max 13 bps like with revy set the setting 2 shots or 1 shot above it your rof. So if you are hitting 17bps set it at 18-19 cmrof. I would set it a little lower for mrof like around 13 because it tends to chop chop.

sens is for sensivity of the cops. Again depends on your hopper. You got a halo I would set the sens at lower level like a 2-3 setting even a 1 if you have problems and higher for a revy like 7 to 9 setting. Eggs should be around 6. I have mine at 9

BAS lowers the rate of fire if cops is sensing feed problems, I say about 7-9 is good. I have mine at 6 because I'm not a paint slinger.

Dwell people have different settings dependng on lpr setting. Emmit has his so check his out. I think is 65 for lpr and 16 for dwell

[uvalaxman19]

lpr should always be at 95-100 and dwell should always be at 14...straight from ken crane

[ricecrispi]

I might have confused it with a speeds lpr??? :( Actually thats the stock rating to test most Ir3's, UVALAXMAN.
Most people have the LPR a little lower i say about 80-85 and the dwell I think at 16.
This is top of my mind and not the most reliable source, most 75% likely i'm off.

Again mines different cuz i running different hammer and valve spring

[paintballjn]

my dwell is at 10 with no problums at all.