TaNkS

[P A C 1]

i need to fill my n2 tank.. i have the large tank that u see at pb fields filling c02 or n2.. now all i need to know is where to fill the tank. i have an adapter that screws on the top of a tank and l00ks like it puts air in threw the top(where the gas comes out)... BUT.. there is a silver niple maybe 3/4" long that sticks out sideways at the top of my crossfire tank.. is that where the tank is ussually filled? is it threw that nipple? also is there a website that i can order an adapter for my large air sorce (to use on a n2 tank)? thanks

[sharps990]

first off this may sound silly but you do know that you need a compressor to fill the fill tank first right(and those things run like 5g's a peice)?

second you could probally google search high pressure compressors and find what you are looking for

sharps

[mamba_juice]

the way i fill them is with a system just like the co2 ones.

you have a steel line going into a good 2x5x2 block of alluminum...you should be able to find high pressure line and the fittings you need at a welding supply store. it has a hole drilled straight through it lenghtways, a hole with a large thumb screw and a piston to vent the air, and a guage to tell what the pressure is. then a high pressure line going out and into a slide-check that attaches to the fill nipple...it costs around $40 to make, but can only fill to the pressure of the bulk tank....but it's a cheap way until you can afford a booster.

[Emmit]

how many times are you going to ask this question in one night????